Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black USB-to-TTL serial cable with FT232RNL chip, 4-pin header and SH1.0 3-pin connector, three status LEDs

LORDWORLD

LORDWORLD USB to TTL (D) Serial Cable FT232RNL Raspberry Pi 5 4pin SH1.0 3PIN

SKU CH-DQ1R-RKYQ3

USB-to-TTL serial cable with original FT232RNL chip, three LEDs and 4-pin plus SH1.0 3-pin headers for Raspberry Pi UART debugging

  • Original FT232RNL chip delivers stable serial transmission
  • Three LED indicators show operating status for easier debugging
  • Supports Win 7, 8, 8.1, 10, 11, Mac, Linux, Android
  • Includes separated 4-pin header and SH1.0 3-pin connector for Raspberry Pi 5
  • Compatible with multiple devices for flexible UART debugging

USB to TTL cable with FT232RNL

The cable provides a USB-to-serial link using an original FT232RNL chip for Raspberry Pi 5 UART debugging. It includes a separated 4-pin header and an SH1.0 3-pin connector for flexible attachment. Makers and engineers use it to access the Pi console during development.

Stable transmission under continuous use

The FT232RNL maintains reliable data flow during long debugging sessions without drop-outs. Three onboard LEDs show power, transmit and receive activity so you can monitor status at a glance. Drivers are available for Windows 7 through 11, Mac, Linux and Android.

Original FT232RNL chip decides fit

Only boards that expose a compatible 4-pin or SH1.0 3-pin UART header can connect directly. Buyers who need a different pin pitch or a USB-C interface must choose another adapter.

Kohokohdat

  • Original FT232RNL chip delivers stable serial transmission
  • Three LED indicators show operating status for easier debugging
  • Supports Win 7, 8, 8.1, 10, 11, Mac, Linux, Android
  • Includes separated 4-pin header and SH1.0 3-pin connector for Raspberry Pi 5
  • Compatible with multiple devices for flexible UART debugging

Tekniset tiedot

BrandLORDWORLD

Kysymyksiä tästä tuotteesta

How much power does the FT232RNL cable draw when it is plugged in all day?

The cable is powered from the USB port and uses the FT232RNL chip, which typically draws only a few milliamps during continuous operation.

What must I already have to use the SH1.0 3PIN and 4pin headers with my Raspberry Pi 5?

You need a Raspberry Pi 5 with its UART pins exposed and a host computer running Win 10, 11, Mac, Linux or Android with a free USB port.

Will the three status LEDs still be visible if I keep an older Raspberry Pi 4 in the same setup?

Yes, the LEDs show TX, RX and power activity on the cable itself, so they remain visible regardless of which Pi model is connected.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.