Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Orange rectangular mini ASIC miner with black accents, fanless design, USB-C power input

LuckyMiner

LuckyMiner NerdQX 8TH/s BM1370 Orange Edition mining hardware

SKU CH-06GS-E6SZ5

An open-source SHA-256 ASIC miner delivering 8 TH/s at 170 W with passive cooling for silent solo Bitcoin mining

  • Crypto AlgorithmSHA-256
  • Compatible CurrencyBitcoin (BTC)
  • Mining HardwareBM1370
  • Hashrate8TH/S
  • Power Efficiency170W
  • 8 TH/s SHA-256 hashrate for solo Bitcoin mining
  • BM1370 ASIC chip delivers 170 W power efficiency
  • Open-source firmware with web GUI enables full customisation
  • Silent passive cooling suits home or office use
  • USB-C 12 V 10 A input keeps cabling simple

NerdQX 8 TH/s Bitcoin Miner

The NerdQX is an open-source mini ASIC built around the BM1370 chip for SHA-256 Bitcoin mining. It delivers 8 TH/s hashrate while drawing approximately 170 W from a USB-C 12 V supply. The fanless design makes it suitable for quiet home or office environments. Its Orange Edition colourway distinguishes it on a desk.

8 TH/s Hashrate and Power Envelope

At 8 TH/s the unit provides enough throughput for solo pool participation where a block reward of 3.125 BTC plus fees is possible. Power draw sits around 170 W, so thermal headroom is limited to what passive dissipation can handle. Sustained loads will raise chassis temperature until equilibrium is reached. There is no active cooling to extend that ceiling.

USB-C Power and Open-Source Firmware

The miner requires a 12 V 10 A USB-C source, so a compatible adapter or powered hub must be supplied by the builder. Open-source firmware and a web GUI allow configuration without vendor lock-in. Passive cooling frees up space and eliminates fan noise in the build. No additional mounting hardware is included.

Kohokohdat

  • 8 TH/s SHA-256 hashrate for solo Bitcoin mining
  • BM1370 ASIC chip delivers 170 W power efficiency
  • Open-source firmware with web GUI enables full customisation
  • Silent passive cooling suits home or office use
  • USB-C 12 V 10 A input keeps cabling simple

Tekniset tiedot

ModelNerdQX
Crypto AlgorithmSHA-256
Compatible CurrencyBitcoin (BTC)
Mining HardwareBM1370
Hashrate8TH/S
Power Efficiency170W

Kysymyksiä tästä tuotteesta

Will the USB-C 12 V 10 A power input work with the 150–170 W adapter I already use for other gear?

The NerdQX draws roughly 150–170 W through its USB-C port at 12 V 10 A, so any quality adapter that can sustain that voltage and current will run the miner.

How can I confirm the BM1370 ASIC is delivering the rated 8 TH/s once I plug it in?

Open the built-in web GUI, point the miner at your chosen solo pool, and watch the real-time hashrate reading settle at 8 TH/s with a stable SHA-256 share rate.

Does the Orange Edition box include the 12 V 10 A USB-C power supply, or do I need to buy it separately?

The package contains the NerdQX miner only; a 12 V 10 A USB-C power adapter capable of 150–170 W must be purchased separately.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.