Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
White dual-bay SATA drive dock with two vertical slots

MAIWO

MAIWO K3072 dual-bay SATA drive enclosure white

SKU CH-5HV0-E16RH

Dual-bay SATA enclosure with offline clone and UASP for two 2.5 or 3.5 inch drives up to 40TB total

  • ColorWhite
  • Typebuffer_90087
  • MaterialClassic Plastic
  • External Interfacebuffer_90088
  • HDD Count SupportedDual HDD
  • Number of Bay2 Bay

Material Classic Plastic

Size USB 3.0 3.5"

  • Offline clone without a computer saves time
  • Supports 2.5 and 3.5 inch SATA drives up to 20TB each
  • UASP protocol enables 5Gbps transfer speeds
  • Tool-free design allows instant drive swaps
  • Includes 12V/3A power adapter and USB 3.0 cable

Two-Bay SATA Dock with Offline Clone

The MAIWO K3072 is a dual-bay enclosure that accepts 2.5 and 3.5 inch SATA hard drives and SSDs. It connects to a host via USB 3.0 and includes a 12V/3A power adapter for desktop operation. The tool-free design lets you swap drives without screws or drivers. It suits users who need quick access to bare SATA drives for backup or data recovery.

Offline One-Key Clone Function

A dedicated clone button copies data from the source bay to the target bay without a computer attached. The dock supports drives up to 20TB each, giving a combined 40TB potential capacity. This hardware-level duplication works sector-by-sector and is independent of file system or operating system. It is not for users who require software verification or incremental imaging.

UASP-Accelerated Sustained Transfer

With UASP protocol enabled, the USB 3.0 interface moves large sequential workloads at up to 5Gbps, reducing CPU overhead during long copies. The plastic chassis provides passive cooling for both drives during extended clone or transfer sessions. It is not for workflows that demand 10Gbps NVMe speeds or active cooling under continuous maximum throughput.

Kohokohdat

  • Offline clone without a computer saves time
  • Supports 2.5 and 3.5 inch SATA drives up to 20TB each
  • UASP protocol enables 5Gbps transfer speeds
  • Tool-free design allows instant drive swaps
  • Includes 12V/3A power adapter and USB 3.0 cable

Tekniset tiedot

BrandMAIWO
ModelK3072
ColorWhite
Typebuffer_90087
MaterialClassic Plastic
External Interfacebuffer_90088
HDD Count SupportedDual HDD
Number of Bay2 Bay
Maximum Capacity (per Bay)Up to 8TB

Tämän mallin muut versiot

3 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What does the 40 TB expansion figure mean when the dock is connected to a PC?

The dock can address up to 20 TB per bay, so two drives give a combined 40 TB of usable storage once the host OS recognises both volumes.

Which external interface standard limits the transfer rate, and what speed does it cap at?

USB 3.0 (5 Gbps) is the external link; with UASP enabled the practical ceiling is the bus's 5 Gbps signalling rate.

What physical drive sizes and mounting style does the enclosure accept?

Tool-free trays take any 2.5-inch or 3.5-inch SATA HDD or SSD up to 20 TB each, no screws or caddies required.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.