Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver metal 1U ATX power supply unit with rear fan grille and cable bundle

Mean Well

Mean Well IPC-250 12V 15A 250W Industrial 1U ATX power supply

SKU CH-27J8-6GEXN

A 250 W ATX power supply with a 12 V 15 A output, built-in active PFC and forced-air cooling for 1U rack systems

  • TypeAT
  • Universal AC input works worldwide without manual switching
  • Active PFC improves power efficiency and reduces harmonic distortion
  • Low-profile 1U design fits compact rack-mount chassis
  • circuit overload and over-voltage protections safeguard connected hardware
  • Built-in DC fan delivers forced-air cooling for stable operation

Industrial 1U ATX power supply

The Mean Well IPC-250 is a 250 W AT form-factor unit designed for 1U and 2U rackmount chassis. Its universal AC input accepts full-range mains voltage without manual switching. Active power-factor correction and built-in short-circuit, overload and over-voltage protections suit industrial and server deployments where uptime matters.

Sustained-load behaviour

Forced air cooling from the integrated DC fan maintains thermal stability during continuous operation in confined rack spaces. The PS-ON signal input allows remote power sequencing, while power-good and fail-signal outputs give monitoring systems real-time status feedback. Protections engage cleanly without latch-up, keeping connected loads safe under prolonged demand.

Upgrade context

This unit replaces older fixed-voltage AT supplies that lack active PFC or remote-control signals. The jump is worthwhile when a rack build needs full-range input, standardized fault reporting and a low-profile footprint. It does not address builds requiring higher wattage, modular cabling or newer ATX12V connector layouts.

Kohokohdat

  • Universal AC input works worldwide without manual switching
  • Active PFC improves power efficiency and reduces harmonic distortion
  • Low-profile 1U design fits compact rack-mount chassis
  • circuit overload and over-voltage protections safeguard connected hardware
  • Built-in DC fan delivers forced-air cooling for stable operation

Tekniset tiedot

TypeAT

Kysymyksiä tästä tuotteesta

How much heat and noise does the built-in DC fan produce when the IPC-250 runs continuously at 250 W?

The unit uses forced air cooling from a built-in DC fan; Mean Well does not publish acoustic or thermal figures for continuous full-load operation.

Which cables or connectors must my system already provide for the IPC-250 to power on?

The supply requires a standard ATX motherboard connector and a PS-ON signal from the board; no proprietary cables are included.

Will the IPC-250 work with an older AT-style motherboard that lacks the PS-ON pin?

The unit expects a PS-ON signal to start, so an AT board without that control line will not turn the supply on.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.