Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

Mean Well

Mean Well RD-65B 68W Dual Output Power Supply

SKU CH-806X-597Z9

Enclosed 68 W dual-output AT supply delivers 5 V at 4 A and 24 V at 2 A, rated for 70 °C operation with 105 °C capacitors and 300 VAC surge tolerance

  • TypeAT
  • Dual 5 V and 24 V rails power mixed-voltage systems
  • 68 W total output handles demanding industrial loads
  • 105 °C electrolytic capacitors extend operating life
  • Withstands 300 VAC surge input for 5 seconds
  • Operates reliably up to 70 °C ambient temperature

Enclosed 68 W dual-output supply

The Mean Well RD-65B is an enclosed AC-DC switching unit that delivers 68 W across two fixed rails: 5 V at 4 A and 24 V at 2 A. It is built for industrial equipment, test rigs and automation cabinets that need a compact, rugged power source with no external wiring harness.

Replaces open-frame or single-rail units

The dual-output design removes the need for a separate 5 V auxiliary supply when a 24 V main rail is already required. The jump is worth it when an existing open-frame module cannot meet vibration or temperature specs, or when a single-rail brick forces extra DC-DC converters into the cabinet.

Sustained operation at 70 °C ambient

The supply is rated for continuous duty at 70 °C using 105 °C electrolytic capacitors and survives 300 VAC input surges for 5 seconds. It withstands 5 G vibration without derating, so output remains stable during prolonged heavy-load cycles in harsh environments.

Kohokohdat

  • Dual 5 V and 24 V rails power mixed-voltage systems
  • 68 W total output handles demanding industrial loads
  • 105 °C electrolytic capacitors extend operating life
  • Withstands 300 VAC surge input for 5 seconds
  • Operates reliably up to 70 °C ambient temperature

Tekniset tiedot

TypeAT

Kysymyksiä tästä tuotteesta

What mounting holes or bracket does the 68 W enclosed supply use?

The unit is an enclosed AT-type supply with standard chassis-mount holes; secure it to the case with four screws through the corner flanges.

How do I wire the dual outputs and which step is often missed?

Connect AC input to L, N and ground, then attach CH1 5 V at 4 A and CH2 24 V at 2 A; the step most installers forget is tightening the ground lug before powering on.

Which component should I plan to replace after long 70 °C operation?

The 105 °C-rated electrolytic capacitors are the wear items; expect to recap the supply after several years of continuous high-temperature use.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.