Micron
Micron MTFDDAK3T8TGA-1BC1ZA 5400 PRO 3.84TB internal SSD
A 2.5 inch SATA enterprise SSD with 3.84TB of 3D NAND TLC storage and sequential speeds up to 540 MBps read and 520 MBps write
- Device TypeInternal / External Solid State Drive (SSD)
- Used ForEnterprise
- Form Factor2.5"
- Capacity3.84TB
- Memory Components3D NAND TLC
- InterfaceSATA III
- Enterprise reliability from 3D NAND TLC
- Sequential reads up to 540 MBps
- Sequential writes up to 520 MBps
- 84 TB capacity in a 2.5 inch form factor
- SATA 6Gb/s interface for broad compatibility
Enterprise SATA SSD
The Micron 5400 PRO is a 3.84TB internal solid state drive built for enterprise workloads. It uses a 2.5 inch form factor and connects through a SATA III interface. The drive employs 3D NAND TLC memory and operates without a DRAM cache, relying on SLC caching instead. Sequential reads reach up to 540 MBps and writes up to 520 MBps.
Straightforward 2.5 inch fit
Installation follows the standard 2.5 inch SATA mounting pattern used in most server and storage chassis. The drive requires a SATA data cable and a SATA power connection, both keyed to prevent misalignment. Because it lacks a DRAM buffer, the controller manages mapping tables in NAND, so a sudden power loss during heavy writes can leave the last commands incomplete. Firmware updates should be applied before deployment to avoid early revision bugs.
Capacity for read heavy workloads
At 3.84TB the drive holds large datasets such as content libraries, backup repositories or virtual machine images. The SATA III link and TLC NAND deliver consistent throughput for sequential and mixed read workloads. Sustained random write performance will saturate below the peak 520 MBps figure once the SLC cache fills, making the drive less suited for write intensive databases or logging tiers.
Kohokohdat
- Enterprise reliability from 3D NAND TLC
- Sequential reads up to 540 MBps
- Sequential writes up to 520 MBps
- 84 TB capacity in a 2.5 inch form factor
- SATA 6Gb/s interface for broad compatibility
Tekniset tiedot
| Brand | Micron |
|---|---|
| Series | 5400 PRO |
| Device Type | Internal / External Solid State Drive (SSD) |
| Used For | Enterprise |
| Form Factor | 2.5" |
| Capacity | 3.84TB |
| Memory Components | 3D NAND TLC |
| Interface | SATA III |
| Protocol | SATA |
| Cache | No DRAM (SLC) |
| Max Sequential Read | Up to 540 MBps |
| Max Sequential Write | Up to 520 MBps |
| Lähetyspaino | 0.91 kg |
| Pakkauksen mitat | 133 × 127 × 102 mm |
Kysymyksiä tästä tuotteesta
How can I verify the MTFDDAK3T8TGA-1BC1ZA is performing at up to 540 MBps sequential read after installation?
Run a SATA benchmark tool such as CrystalDiskMark; the drive should report sequential read speeds near 540 MBps and sequential write near 520 MBps when the system SATA III link is operating correctly.
What accessories are included with the Micron 5400 PRO 3.84TB 2.5" drive and what must I purchase separately?
The package contains only the 2.5" SSD itself; a SATA data cable, a SATA power cable or adapter, and a 2.5" drive bracket or bay are not included and must be sourced separately.
Which capacity version of the 5400 PRO series should I choose for a write-intensive enterprise workload?
The 3.84TB model provides 3840 GB of 3D NAND TLC storage with SLC caching, delivering up to 520 MBps sequential write — suited to heavy enterprise write workloads.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
