Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green 288-pin DDR5 DIMM with black chips, 64GB server memory

Micron Technology, Inc.

Micron Technology, Inc. MTC40F2046S1RC48BR 64GB DDR5 4800 CL40 1.10V ECC Registered 2Rx4 server RAM

SKU CH-N1BS-3KTXQ MPN MTC40F2046S1RC48BR

64 GB DDR5 server memory with ECC, registered dual-rank design, CL40 timing and 1.10 V operation at 4800 MHz

  • Capacity64GB
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Timing40-39-39
  • Voltage1.10V
  • ECCYes
  • 64 GB capacity lets you run larger workloads in memory
  • DDR5 4800 speed delivers high bandwidth for server applications
  • ECC registered design corrects errors to protect data integrity
  • CL40 1.10 V timing balances low latency with efficient power use
  • 288-pin dual-rank 2Rx4 module fits standard server DIMM slots

64 GB DDR5 4800 registered ECC module

This 64 GB DDR5 module runs at 4800 MT/s with CL40 timing and 1.10 V operation. It is a 2Rx4 registered DIMM with on-die ECC for data integrity. The 288-pin form factor fits server and workstation platforms that require registered memory.

Suited for high-capacity server deployments

The dual-rank design helps maximize installed memory per channel on compatible motherboards. Registered signalling reduces electrical load on the memory controller. Buyers needing unbuffered DIMMs or lower-capacity modules for consumer boards should look elsewhere.

Registered ECC DDR5 at 4800 MT/s

The registered buffer and ECC function are mandatory for most enterprise platforms. Systems that accept only unbuffered non-ECC memory cannot use this module. Verify motherboard qualification lists before purchase.

Kohokohdat

  • 64 GB capacity lets you run larger workloads in memory
  • DDR5 4800 speed delivers high bandwidth for server applications
  • ECC registered design corrects errors to protect data integrity
  • CL40 1.10 V timing balances low latency with efficient power use
  • 288-pin dual-rank 2Rx4 module fits standard server DIMM slots

Tekniset tiedot

BrandMicron
Part NumberMTC40F2046S1RC48BR
Capacity64GB
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Timing40-39-39
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
FeaturesMicron server DRAM - Speed up your servers | Micron Server DRAM increases performance and helps maximize IT budgets.
Speed up applications and get more out of your IT budget with Micron Server DRAM. Maximizing installed memory capacity with Micron Server DRAM is one of the easiest and most affordable ways to make your deployments faster and more efficient.
Speed up server applications
By installing Micron DRAM, you'll be able to maximize the performance capability of your CPUs and optimize your servers' computing potential. Since memory typically functions as a fixed (non-shared) com
Lähetyspaino0.45 kg
Pakkauksen mitat152 × 51 × 13 mm

Kysymyksiä tästä tuotteesta

What motherboard slot does the 288-pin DIMM require?

It needs a DDR5 DIMM socket; the 288-pin keying is specific to DDR5 and will not fit earlier DDR generations.

Can I mix this 4800 MT/s registered module with slower DDR5 modules already in my server?

The system will run all modules at the lowest common speed, so existing slower DDR5 memory will set the overall data rate.

How do I confirm the module is running at 4800 MT/s with CL40 timing after installation?

Check the BIOS memory information or use a tool such as dmidecode to verify the reported speed of 4800 MT/s and timings of 40-39-39.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.