Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Compact silver microserver with front power button, USB ports and rear dual 10GbE RJ45 connections

MITXPC

MITXPC Xeon D-1518 MicroServer 8GB ECC Dual 10GbE

SKU CH-4185-CDFET

Compact quad-core server with dual 10GbE and dual Gigabit ports, IPMI, 8GB ECC DDR4, SATA RAID support and VESA mounting

  • TypeMicroServer
  • Quad-core Xeon D-1518 delivers 8 threads at 35W TDP
  • Dual 10GbE and dual 1GbE ports for high-speed networking
  • 8GB DDR4 ECC memory installed, expandable to 128GB
  • Dedicated IPMI port enables remote server management
  • Compact 228.4 x 194.4 x 61.8 mm chassis with VESA mount

Compact MicroServer for Edge and Branch Offices

The MITXPC Xeon D-1518 MicroServer integrates a quad-core 2.2 GHz Xeon D-1518 processor with 35 W TDP and 8 GB of DDR4-2133 ECC UDIMM memory. Dual 10 GbE and dual 1 GbE ports plus a dedicated IPMI interface provide managed connectivity. The fanless-friendly 228.4 x 194.4 x 61.8 mm chassis includes wall-mount and VESA brackets for space-constrained deployments.

Storage and Expansion Constraints

Six SATA3 6 Gb/s ports and a single M.2 M-key slot supporting 2242 or 2280 modules handle local storage. RAID 0, 1, 5 and 10 are available through RSTe. Memory scales to 128 GB with ECC RDIMMs or 64 GB with ECC or non-ECC UDIMMs at 1866 or 1600 MHz. The sole PCIe 3.0 x16 slot is electrically present but physically inaccessible in the assembled unit.

Installation Notes and Common Issues

A 60 W 12 V locking AC-DC adapter powers the system through an internal DC-IN connector. One 40 x 10 mm fan is pre-installed; three additional fan headers are available for thermal headroom. Front-panel USB 2.0 and a power button with LED simplify basic operation. Builders needing a usable add-in card slot or more than two 2.5-inch drive bays should consider a larger platform.

Kohokohdat

  • Quad-core Xeon D-1518 delivers 8 threads at 35W TDP
  • Dual 10GbE and dual 1GbE ports for high-speed networking
  • 8GB DDR4 ECC memory installed, expandable to 128GB
  • Dedicated IPMI port enables remote server management
  • Compact 228.4 x 194.4 x 61.8 mm chassis with VESA mount

Tekniset tiedot

TypeMicroServer

Kysymyksiä tästä tuotteesta

Should I add 32 GB or 64 GB DDR4 ECC RDIMM modules to reach the 128 GB maximum?

The board accepts 32 GB DDR4 ECC RDIMM modules; populate all four DIMM slots with them to reach the 128 GB ceiling.

What real-world throughput can I expect from the 10 GbE ports with the Xeon D-1518?

The two 10 GbE ports connect directly to the SoC, so sustained line-rate traffic is limited by the 35 W TDP and PCIe 3.0 x16 lane budget.

Does the M.2 slot run at PCIe 3.0 x4 or is it shared with SATA?

The M.2 M-key socket supports PCIe or SATA signalling; the platform routes it through a multiplexer, so only one protocol is active at a time.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.