Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black rectangular PCB with one SATA socket and eight 3-pin fan headers, adhesive backing visible

ModMyMods

ModMyMods SATA 8-Way 3-Pin Fan Hub Power Splitter (CAB297)

SKU CH-VQ8Z-ZKMRE

Distributes SATA power to eight 3-pin fans via a black PCB with adhesive backing

  • ColorsBlack
  • FeaturesThe SATA Power Distribution PCB 8xWay Block is the perfect o
  • Powers eight 3-pin fans from a single SATA connector
  • Black PCB and connectors maintain a clean, professional look
  • Adhesive backing and Velcro strip allow mounting anywhere in the case
  • Replaces multiple Y-splitters to reduce cable clutter
  • Compact PCB design fits tight spaces for tidy cable routing

SATA-powered 8-way 3-pin fan hub

The ModMyMods SATA 8-Way 3-Pin Fan Hub Power Splitter (CAB297) distributes power from a single SATA connector to eight 3-pin fans. It is built for modders, water-cooling enthusiasts and power users who run many fans in a PC or server. The black PCB and connectors keep the look clean inside the case.

Single SATA input feeds eight 3-pin outputs

The decisive specification is the 8 x 3-pin fan output arrangement driven by one SATA power connection. This replaces multiple Y-splitters and removes the cable clutter that comes with chaining them together. Builders who need more than eight fan headers or voltage-controlled headers will need a different solution.

Pre-installed mount rail and Velcro strip

The bundle includes a black mounting rail and a Velcro strip already fitted to the PCB adhesive backing. These let you secure the hub in tight or hidden spots without extra hardware. No software, controllers or additional cables are supplied.

Kohokohdat

  • Powers eight 3-pin fans from a single SATA connector
  • Black PCB and connectors maintain a clean, professional look
  • Adhesive backing and Velcro strip allow mounting anywhere in the case
  • Replaces multiple Y-splitters to reduce cable clutter
  • Compact PCB design fits tight spaces for tidy cable routing

Tekniset tiedot

BrandGENERIC
ModelMOD-0057
Part NumberMOD-0057
ColorsBlack
FeaturesThe SATA Power Distribution PCB 8xWay Block is the perfect organizational solution for hard core modder's, water cooling enthusiasts and other power users that use a large amount of cooling fans in their systems or servers.

Kysymyksiä tästä tuotteesta

What does the 8-way 3-pin output mean for my fan setup?

It lets you run up to eight 3-pin fans from a single SATA power connector, so all fans receive power simultaneously without daisy-chaining splitters.

How does the SATA input limit the hub in practice?

The hub draws all power through one SATA plug, so the total current for all eight fans cannot exceed what that single connector and your power supply can safely deliver.

What does the hub need to mount inside the case?

It includes a pre-installed black mount rail and a Velcro strip, plus adhesive backing on the PCB, so you can secure it to any flat surface without screws.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.