Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black ATX tower case with American Walnut wood front panel, steel and plastic body, tempered glass side panel

Montech

Montech XR Wood Black ATX PC case

SKU CH-XYWD-FF910

ATX case with American Walnut front panel, four pre-installed 120 mm ARGB fans, 360 mm top radiator support, 420 mm GPU clearance, 175 mm CPU cooler height, and full-coverage dust filters

  • TypeATX Cases
  • ColorBlack
  • Case MaterialSteel / Plastic / Wood
  • With Power SupplyNo
  • Motherboard CompatibilityATX / Micro ATX / Mini-ITX
  • Dust FiltersBottom / Front / Side / Top

Options Black

Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.

  • American Walnut front panel adds natural elegance to your build
  • Supports up to 12 fans and a 360 mm radiator for maximum cooling
  • Four-sided dust filters on bottom, front, side and top protect every intake
  • Fits 420 mm GPU, 175 mm CPU cooler and 230 mm PSU in 18.7 x 9.1 x 17.9 inch frame
  • Four pre-installed GF120 ARGB PWM fans deliver instant airflow and lighting

Natural wood front panel

The Montech XR Wood Black is an ATX chassis that blends steel, plastic and American Walnut on the front panel for a distinctive look. It supports ATX, Micro-ATX and Mini-ITX motherboards and comes with four pre-installed GF120 ARGB PWM fans running at 800 to 1600 RPM. The case targets builders who want a premium aesthetic without sacrificing internal space for high-end components.

Tool-free access and dust protection

Tempered glass side panels swing open without tools, making hardware installation straightforward. A 360-degree four-sided dust filter covers bottom, front, side and top intakes, keeping all fan locations clean. Builders should route the pre-installed fan cables and ARGB connectors carefully behind the motherboard tray to avoid restricting airflow or snagging the glass hinges during reassembly.

Suited for showcase air or water builds

This chassis suits enthusiasts building around long graphics cards up to 420 mm and tall CPU coolers up to 175 mm, with room for a top-mounted 360 mm radiator. Two 3.5-inch and two 2.5-inch drive bays handle moderate storage needs. Buyers who need more than four drive bays, a second radiator location or a smaller footprint for compact desks should look at other form factors.

Kohokohdat

  • American Walnut front panel adds natural elegance to your build
  • Supports up to 12 fans and a 360 mm radiator for maximum cooling
  • Four-sided dust filters on bottom, front, side and top protect every intake
  • Fits 420 mm GPU, 175 mm CPU cooler and 230 mm PSU in 18.7 x 9.1 x 17.9 inch frame
  • Four pre-installed GF120 ARGB PWM fans deliver instant airflow and lighting

Tekniset tiedot

BrandMontech
SeriesXR Wood
ModelXR Wood Black
TypeATX Cases
ColorBlack
Case MaterialSteel / Plastic / Wood
With Power SupplyNo
Motherboard CompatibilityATX / Micro ATX / Mini-ITX
Dust FiltersBottom / Front / Side / Top
Internal 3.5" Drive Bays2
Internal 2.5" Drive Bays2
Expansion Slots7
Fan OptionsFront - 3 x 120mm / Rear - 1 x 120mm
Radiator OptionsTop - Up to 360mm
Max GPU Length420 mm
Max CPU Cooler Height175 mm
Max PSU Length230 mm
Dimensions18.7" x 9.1" x 17.9"
Lähetyspaino8.26 kg
Pakkauksen mitat559 × 508 × 305 mm

Tämän mallin muut versiot

1 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How do I verify the four pre-installed GF120 ARGB PWM fans are running at the correct speed after assembly?

Check fan RPM in BIOS or monitoring software; the GF120 fans should report between 800 and 1600 RPM with a ±10 % tolerance.

Which components are included in the box and what must be purchased separately for a complete build?

The case ships with four GF120 ARGB PWM fans, dust filters on all four sides and mounting hardware; you still need a motherboard, CPU, cooler, GPU, memory, storage and an ATX power supply.

Which version of the XR Wood should I choose if I need maximum GPU clearance and a 360 mm radiator on top?

The XR Wood Black ATX model supports graphics cards up to 420 mm long and a 360 mm radiator in the roof, matching those requirements.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.