NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
MSI
Delivers 8 GB GDDR5 memory and 2432 CUDA cores on a 256-bit bus with dual-fan cooling and 180 W power draw
The GTX 1070 Ti Gaming 8GB GDDR5 is a graphics card built around the GeForce GTX 1070 Ti processor with 2432 CUDA cores and 8GB of GDDR5 memory on a 256-bit bus. It targets gamers and creators who need strong 1440p performance and VR readiness. The card connects through a PCI Express x16 3.0 slot and requires one 6-pin and one 8-pin power connector.
Under continuous load the GPU runs at a base clock of 1607 MHz and can boost to 1683 MHz while the memory operates at 8008 MHz. The dual-fan active cooler manages a thermal design power of 180W so that clocks remain stable during long sessions. A 500W system power supply is specified to support the whole platform.
The x16 3.0 link provides the data path between the card and the rest of the system. Display outputs consist of one HDMI 2.0 port, three DisplayPort 1.4 connectors and one Dual-Link DVI-D port, supporting up to four simultaneous displays. DirectX 12.0 and OpenGL 4.5 define the software feature ceiling for this hardware.
| GPU | GeForce GTX 1070 Ti |
|---|---|
| Memory Size | 8GB |
| Memory Type | GDDR5 |
| Thermal Design Power | 180W |
The dual-fan active cooler is designed to handle the 180W thermal design power. Typical noise and temperature levels depend on case airflow and fan curve settings rather than a single fixed figure.
A minimum 500W system power supply is required. The card draws supplementary power through one 6-pin and one 8-pin PCIe connector, so your PSU must provide both.
The card uses a PCI Express x16 3.0 interface which is backward compatible with PCIe 2.0 slots. For displays it offers one HDMI 2.0, three DisplayPort 1.4 and one Dual-Link DVI-D port.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?