Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Three white 120mm case fans with ARGB lighting and magnetic connector blocks, shown in a 3-pack arrangement

MSI

MSI MPG EZ120 ARGB WHITE-3W 120mm case fan 3-pack

SKU CH-PXH5-0GB5H MPN MPG EZ120 ARGB WHITE-3W

Three white 120 mm fans with patented magnetic blocks that daisy-chain power and ARGB signals, fluid-dynamic bearings, 33 addressable LEDs each, 73.82 CFM airflow at 1900 RPM and 28.82 dBA noise

  • Fan Counts3 Fans
  • Fan ControllerController
  • TypeCase Fan
  • Fan Size120mm
  • Fan Thickness28mm
  • Bearing TypeFluid Dynamic

Option 3 Fans w/ Controller

  • Magnetic connector blocks simplify cable routing and power delivery
  • 33 addressable RGB LEDs provide vibrant lighting from every angle
  • Fluid dynamic bearing runs at 28.82 dBA for quiet operation
  • 1900 RPM maximum speed delivers 73.82 CFM airflow
  • 56 mmH₂O static pressure suits radiators and restrictive filters

Three-Fan White ARGB Kit

The MSI MPG EZ120 ARGB WHITE-3W bundles three 120 mm white case fans with addressable RGB lighting and a magnetic connector system. Each fan uses a fluid dynamic bearing and runs up to 1900 RPM, delivering 73.82 CFM airflow at 2.56 mmH₂O static pressure. The pack includes a control hub, magnetic connector blocks, decorative blocks and all cables needed for a tidy build.

Magnetic Daisy-Chain Upgrade

This kit replaces conventional fan-and-ARGB cable runs with patented magnetic connector blocks that snap together to carry both power and LED signals. Two blocks link each pair of fans, cutting cable clutter and speeding installation in cases that mount two or three 120 mm fans side by side. The jump is worth it when you want a cleaner interior without sacrificing PWM or ARGB control.

Sustained Cooling Profile

At full speed the fans produce 28.82 dBA while moving 73.82 CFM against 2.56 mmH₂O resistance, figures that hold steady during extended loads thanks to the fluid dynamic bearing. The 28 mm thick frame fits standard 120 mm mounts but leaves no room for slimmer alternatives. Builders needing higher static pressure for dense radiators or quieter operation at lower RPM should look elsewhere.

Kohokohdat

  • Magnetic connector blocks simplify cable routing and power delivery
  • 33 addressable RGB LEDs provide vibrant lighting from every angle
  • Fluid dynamic bearing runs at 28.82 dBA for quiet operation
  • 1900 RPM maximum speed delivers 73.82 CFM airflow
  • 56 mmH₂O static pressure suits radiators and restrictive filters

Tekniset tiedot

BrandMSI
ModelMPG EZ120 ARGB WHITE-3W
Fan Counts3 Fans
Fan ControllerController
TypeCase Fan
Fan Size120mm
Fan Thickness28mm
Bearing TypeFluid Dynamic
RPM0~1900 RPM +/-10%
Air Flow73.82 CFM
Air Pressure2.56 mmH2O
Noise Level28.82 dBA
Power Connector7-pin JAF / 4-pin PWM & 3-pin ARGB
ColorWhite
LEDARGB
FeaturesMagnetic Connection
Each two MPG EZ120 ARGB fans can be connected by patented Magnetic Connector Blocks, delivering power and controlling fan speed and LED signals, making installation effortlessly
ARGB Fan
MPG EZ120 ARGB features 33 well-arranged addressable RGB LEDs that show MPG spirits and make it flawless from all possible angles
Mystic Light Sync
Set up the vibe in your way! Each fan is divided into 3 zones to control lighting effects and colors individually via the Mystic Light utility
Exclusive Fluid Dynamic Bearing Structure
The exclusive structural design optimizes the orig
Dimensions120 x 120 x 28 mm / 4.7 x 4.7 x 1.1 inches
Package Contents3 x MPG EZ120 ARGB fans
3 x Decorative Blocks
4 x Magnetic Connector Blocks
1 x ARGB Fan Control Hub
1 x Self-Adhesive Magnetic Plate
1 x MicroUSB-JUSB Cable
1 x Hub-JAF1 Cable
1 x Hub-Fan-ARGB Y Cable
4 x Fan-Hub Cables
1 x Daisy Chain Cable
12 x Screws (M5 10mm)
12 x Screws (#6-32 33mm)
Lähetyspaino1.13 kg
Pakkauksen mitat165 × 165 × 140 mm

Tämän mallin muut versiot

3 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What clearance is needed for the 28 mm thick fans?

Each fan measures 120 x 120 x 28 mm, so allow at least 28 mm depth behind the mounting surface plus room for the magnetic connector blocks that join adjacent fans.

How do I connect the three fans and ARGB lighting without loose cables?

Snap the four magnetic connector blocks between the fans to carry both PWM power and ARGB signals, then plug the hub into a 7-pin JAF header and a USB 2.0 header for software control.

When should I expect to replace the fluid dynamic bearing fans?

The fluid dynamic bearing is rated for long life; plan on swapping fans only if noise rises above 28.82 dBA or airflow drops below 73.82 CFM after several years of continuous 1900 RPM operation.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.