NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
MSI
Mid-tower case supports ATX and E-ATX boards, fits 360 mm radiators, and includes four 120 mm ARGB fans
The MPG GUNGNIR 211R AIRFLOW PZ is a black mid-tower chassis built from SPCC steel with a tempered glass side panel. It fits ATX, E-ATX, Micro-ATX and ITX motherboards and comes with four pre-installed 120 mm PWM ARGB fans for immediate airflow. The geometric front panel and LED button let you customise lighting without extra software.
Four fans and a back-connect layout are already mounted, so the main work is routing cables behind the motherboard tray and securing drives in the two 3.5-inch or six 2.5-inch bays. The tempered glass panel swings open on hinges, but alignment can be tight if cables press against the edge. Radiator brackets support 120, 140, 240, 280 and 360 mm units at front and top, yet the front mounting points sit close to the drive cages, so long radiators may limit drive space.
Confirm your graphics card is no longer than 360 mm and your CPU cooler stays under 175 mm in height. The power supply must fit within 220 mm depth, and the seven expansion slots cover standard double-slot cards only. Front and top radiator clearance shares the same volume, so a 360 mm unit in one location blocks the other. Builders needing more than two 3.5-inch drives or a thicker radiator stack should verify internal layout first.
| Brand | MSI |
|---|---|
| Model | MPG GUNGNIR 211R AIRFLOW PZ |
| Type | ATX Mid Tower |
| Color | Black |
| Case Material | SPCC Steel / Tempered Glass |
| Motherboard Compatibility | ATX / E-ATX / ITX / Micro ATX |
| Side Panel | 1 x Side Tempered Glass Panel |
| Internal 3.5" Drive Bays | 2 |
| Internal 2.5" Drive Bays | 6 |
| Expansion Slots | 7 |
| Fan Options | Front - 3 x 120mm / Rear - 1 x 120mm / Top - 3 x 120mm |
| Pre-installed Fans | Front - 3 x 120mm / Rear - 1 x 120mm |
| Radiator Options | Top: 120 / 140 / 240 / 280 / 360 mm Front: 120 / 140 / 240 / 280 / 360 mm Rear: 120 / 140 mm |
| Max GPU Length | 360 mm |
| Max CPU Cooler Height | 175 mm |
| Max PSU Length | 220 mm |
| Lähetyspaino | 9.84 kg |
| Pakkauksen mitat | 564 × 546 × 305 mm |
Press the MSI LED button on the I/O panel; the four 120 mm ARGB fans should light immediately and you will hear them spin up when the system posts.
The case includes the SPCC steel chassis, one tempered glass side panel, four pre-installed 120 mm ARGB fans and mounting hardware; you still need a motherboard, CPU cooler, graphics card, power supply and storage drives.
Both the front and top support 120, 140, 240, 280 and 360 mm radiators, so a 360 mm unit can be mounted in either location.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?