Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black mid-tower case with perforated front panel and four ARGB fans visible

MSI

MSI MPG GUNGNIR 300R AIRFLOW Black Mid-Tower PC Case

SKU CH-KEDZ-PBKHB

Mid-tower case with perforated front panel, dual 360 mm AIO support, omnidirectional GPU stand, four pre-installed 120 mm ARGB fans, ten fan mounts.

  • Optimised cooling with one-piece 1mm perforated front panel supporting dual 360mm AIO radiators
  • High-end GPU clearance for vertical or horizontal mounting with dedicated omnidirectional stand
  • Ready-to-build convenience from four pre-installed 120mm ARGB fans synced via Mystic Light
  • Broad motherboard compatibility covering E-ATX 280×305mm down to Mini-ITX
  • Fast front I/O with USB 3.2 Gen 2×2 Type-C at 20Gbps plus two USB 3.2 Gen 1 Type-A ports

Mid-tower case for high-airflow builds

The MSI MPG GUNGNIR 300R AIRFLOW is a mid-tower chassis designed for builders who prioritise cooling performance. Its one-piece 1mm perforated front panel draws air straight into the interior. Four 120mm ARGB fans come pre-installed and sync with Mystic Light. Ten fan mounts in total allow extensive airflow configurations.

Dual 360mm AIO support and GPU clearance

The defining specification is support for dual 360mm liquid coolers at the front and top, including push-pull mounting. An omnidirectional graphics card bracket adjusts to hold heavy cards vertically or horizontally. The interior fits GPUs up to 360mm long and E-ATX boards measuring 280 x 305mm.

Front I/O and expansion headroom

The front panel provides one USB 3.2 Gen 2x2 Type-C port at 20Gbps and two USB 3.2 Gen 1 Type-A ports at 5Gbps. This covers modern peripherals and fast external storage. Builders needing more than ten fan mounts, additional front-panel connectivity or support for radiators larger than 360mm will need a larger enclosure.

Kohokohdat

  • Optimised cooling with one-piece 1mm perforated front panel supporting dual 360mm AIO radiators
  • High-end GPU clearance for vertical or horizontal mounting with dedicated omnidirectional stand
  • Ready-to-build convenience from four pre-installed 120mm ARGB fans synced via Mystic Light
  • Broad motherboard compatibility covering E-ATX 280×305mm down to Mini-ITX
  • Fast front I/O with USB 3.2 Gen 2×2 Type-C at 20Gbps plus two USB 3.2 Gen 1 Type-A ports

Tekniset tiedot

BrandMSI

Kysymyksiä tästä tuotteesta

How does the one-piece 1mm perforated front panel affect airflow when a 360mm AIO is mounted at the front?

The perforated panel lets air pass freely so a front-mounted 360mm AIO can draw cool air directly through the mesh, and the case also supports a push-pull fan configuration on that radiator.

What does the USB 3.2 Gen 2x2 Type-C port’s 20Gbps rating mean for real-world transfer speeds?

The port is rated for 20Gbps theoretical bandwidth; actual speeds depend on the connected device and cable, but it is the fastest front-panel USB standard on this case.

What motherboard sizes and GPU length can physically fit inside the chassis?

The case accepts E-ATX boards up to 280×305mm, ATX, Micro-ATX and Mini-ITX, and clears graphics cards up to 360mm long.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.