Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Rectangular metal power supply unit with 10 PCIe connectors visible on front face

myVolts

myVolts APW 3++ Miner Power Supply 1800W 10 PCIe

SKU CH-SRXE-8ZA3C

1800 W AT power supply with 10 PCIe connectors for Antminer S9 14 repair and workshop use

  • TypeAT
  • Delivers up to 1800W for demanding mining rigs
  • Includes 10 PCIe connectors for direct GPU power
  • AT form factor fits standard server chassis
  • Built with durable materials for continuous operation
  • Power cord not included — source locally rated 10A+

1800W AT power supply for mining rigs

This AT-format unit delivers up to 1800W and is aimed at builders running a single Antminer or similar ASIC miner. It arrives new and ready for installation in repair or mining environments.

Ten PCIe connectors and no mains cable

The bundle provides exactly ten PCIe power leads, limiting use to one Antminer at a time. A mains cord rated for at least 10A must be sourced separately from a local supplier.

Suited to single-ASIC mining and bench repair

Technicians fixing computers, welding gear, phones or appliances can use the robust output. Builders needing more than ten PCIe feeds or an included power cord should look elsewhere.

Kohokohdat

  • Delivers up to 1800W for demanding mining rigs
  • Includes 10 PCIe connectors for direct GPU power
  • AT form factor fits standard server chassis
  • Built with durable materials for continuous operation
  • Power cord not included — source locally rated 10A+

Tekniset tiedot

TypeAT

Kysymyksiä tästä tuotteesta

Will the ten PCIe connectors need replacement after extended mining use?

The unit ships with ten PCIe connectors and the supplier notes it cannot support more than one Antminer, so connector wear would only appear if you exceed that single-unit limit.

What power ceiling stops the supply from running harder under continuous load?

The supply is rated for a maximum output of 1800W, and that figure is the hard limit before protection circuits engage.

How loud or hot does the unit get when it runs all day at full load?

The supplier describes the unit as built from high-quality, firm and durable materials but provides no acoustic or thermal figures for sustained operation.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.