Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Rectangular metal power supply unit with ventilation slots and terminal connectors

myVolts

myVolts AT Switching Power Supply 12V 25A 300W

SKU CH-J5CT-J22XC

Converts AC mains input to 12 V DC at up to 25 A and 300 W with built-in over-voltage, over-current and short-circuit protection

  • TypeAT
  • Delivers stable 12 V DC at 25 A for 300 W output
  • Wide AC input range from 110 V to 240 V suits global mains
  • Metal enclosure aids heat dissipation and protects internal components
  • Built-in over-voltage, over-current and short-circuit protection safeguards connected equipment
  • Certified to CCC, RoHS and CE standards for safety compliance

AC 220V industrial switching supply

The myVolts AT switching power supply converts AC 220V input to a regulated 12V DC output rated at 25A and 300W. It is built for indoor installations that need a fixed-voltage rail for LED strips, CCTV systems, CNC accessories or similar 12V loads. The metal enclosure meets CCC, RoHS and CE compliance for commercial environments.

25A continuous at 12V decides fit

The single specification that determines suitability is the 25A continuous current rating at 12V, delivering 300W. Systems drawing less than 25A will operate within spec; loads that exceed this value require a higher-capacity unit. Input range covers AC 110V to 240V so the same model works on global mains without rewiring.

Convection-cooled metal case runs silent

A fanless aluminium chassis dissipates heat passively across its full surface area, so acoustic output is zero in normal use. Over-voltage, over-current and short-circuit protection circuits engage automatically during fault conditions. The supply is rated for continuous operation between 0°C and 40°C ambient with humidity up to 95% non-condensing.

Kohokohdat

  • Delivers stable 12 V DC at 25 A for 300 W output
  • Wide AC input range from 110 V to 240 V suits global mains
  • Metal enclosure aids heat dissipation and protects internal components
  • Built-in over-voltage, over-current and short-circuit protection safeguards connected equipment
  • Certified to CCC, RoHS and CE standards for safety compliance

Tekniset tiedot

TypeAT

Kysymyksiä tästä tuotteesta

What does the 300 W rating mean for actual 12 V load?

The unit can supply up to 25 A at 12 V DC, giving a maximum continuous output of 300 W for connected equipment.

What input voltage range does the AC side accept?

The supply operates from AC 110 V to 240 V, covering standard mains voltages worldwide.

How large is the 12 V 25 A model and what mounting holes does it use?

The metal case measures 200 mm long, 100 mm wide and 44 mm high; mounting dimensions follow the standard AT form factor.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.