Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Compact blue white black Pico ATX power supply with modular cables and 2.5mm DC input

myVolts

myVolts Bobin 19V 200W Pico ATX Power Supply

SKU CH-YPQD-BFKD3

A compact 19 V pico-ATX supply delivering up to 200 W with a full modular cable set for ITX motherboards

  • TypeAT
  • 200 W rating powers compact desktops and servers
  • 16–24 V DC input accepts common laptop bricks
  • Active PFC improves efficiency and reduces harmonic noise
  • Full modular cables keep small cases tidy
  • 24-pin ATX plus 4-pin CPU and SATA connectors included

Compact Pico ATX supply for 19 V systems

The myVolts Bobin delivers up to 200 W from a 16 V to 24 V DC source, with 19 V suggested. It provides a 24-pin ATX connector, 4-pin CPU auxiliary, one SATA power lead, one Molex and one floppy connector. Active PFC and full modular cabling keep the layout tidy inside small-form-factor or server chassis.

Replaces bulky AC-DC bricks in tight builds

The unit suits ITX motherboards that need standard ATX voltages — +3.30 V, +5.00 V and +12.00 V — without an internal AC inlet. The jump is worth it when space or noise rules out a full-size PSU and a suitable 19 V laptop-style adapter is already available. It is not for systems that require more than 200 W or multiple 12 V GPU connectors.

Plugs directly into a 2.5 mm by 5.5 mm barrel jack

Installation is a straight swap: connect the barrel plug to the adapter, then attach the modular leads to the board and drives. What usually goes wrong is undersizing the external adapter — it must supply the full 200 W at 19 V — or forgetting that the single SATA lead limits drive count without extra splitters.

Kohokohdat

  • 200 W rating powers compact desktops and servers
  • 16–24 V DC input accepts common laptop bricks
  • Active PFC improves efficiency and reduces harmonic noise
  • Full modular cables keep small cases tidy
  • 24-pin ATX plus 4-pin CPU and SATA connectors included

Tekniset tiedot

TypeAT

Kysymyksiä tästä tuotteesta

What input connector size does the Bobin 19V 200W Pico ATX PSU require?

It uses a DC barrel jack with a 2.5 mm inner diameter and a 5.5 mm outer diameter.

How do you install this Pico ATX unit, and what step is often missed?

Connect the 12 V input plug, then attach the 20+4 pin ATX, 4 pin CPU, SATA, Molex and floppy cables; the step often missed is verifying the source delivers 16–24 V before powering on.

Which cables or connectors might need replacement after heavy use?

The 20+4 pin ATX, 4 pin CPU auxiliary, SATA power, 4 pin Molex and floppy drive cables are the items most likely to wear out over time.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.