Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Compact 38mm incremental encoder with metal shell and 2m cable

myVolts

myVolts E6B2-CWZ6C 38mm incremental encoder power supply

SKU CH-90R0-MHQ2C MPN E6B2-CWZ6C

38 mm incremental encoder with DC 5–26 V supply, 2 m cable, and selectable resolution up to 5000 P/R

  • TypeAT
  • High reliability with internal ASIC devices for long life
  • Strong anti-interference performance from built-in ASIC technology
  • Durable stainless steel spindle handles 30 N radial and 20 N thrust loads
  • Compact 38 mm diameter with 2 m cable for easy installation
  • Flexible DC 5 to 26 V supply with reverse wiring and short circuit protection

38mm incremental encoder power supply

The myVolts E6B2-CWZ6C is a compact incremental encoder designed for motion-control systems that need precise position feedback. It suits automation engineers, robotics integrators and test-rig builders who require a rugged sensor with multiple output options.

Upgrade from basic optical encoders

This unit replaces simpler encoders that lack built-in protection or flexible voltage ranges. The jump is worth it when the application demands reverse-wiring protection, short-circuit protection and a wide DC5-26V supply range in a single 38mm diameter housing.

Sustained-load behaviour

The stainless-steel spindle and metal shell maintain signal integrity under continuous 30N radial and 20N axial loads. Internal ASIC devices provide stable complementary, push-pull or differential outputs over the full 2m cable during extended duty cycles without drift.

Kohokohdat

  • High reliability with internal ASIC devices for long life
  • Strong anti-interference performance from built-in ASIC technology
  • Durable stainless steel spindle handles 30 N radial and 20 N thrust loads
  • Compact 38 mm diameter with 2 m cable for easy installation
  • Flexible DC 5 to 26 V supply with reverse wiring and short circuit protection

Tekniset tiedot

TypeAT

Kysymyksiä tästä tuotteesta

What mounting dimensions does the 38 mm diameter encoder need?

The encoder has a 38 mm outer diameter and a 6 mm thrust shaft diameter, so the mounting hole and coupling must match those sizes.

How is the E6B2-CWZ6C wired and which step is often missed?

Connect brown to DC 5–26 V positive, blue to 0 V negative, and black to the signal output; the step often missed is verifying the supply stays within 5–26 V before powering up.

What wear items should be planned for on this incremental encoder?

The stainless steel spindle and internal ASIC are rated for long life, but the 2 m cable and shaft bearings are the parts most likely to need replacement after extended radial or thrust loads.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.