Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Enclosed metal power supply, 38 mm low profile, single output 48 V 3.3 A 150 W

myVolts

myVolts HRPG-150-48 48V 3.3A 150W power supply

SKU CH-ZFBH-G82H4

Enclosed 150W unit delivers 48V at 3.3A with active PFC above 0.95 and up to 88% efficiency

  • TypeAT
  • High efficiency up to 88% reduces energy waste
  • Active PFC with PF>0.95 improves power quality
  • Withstands 300VAC surge input for 5 seconds
  • Multiple protections include short circuit and overload
  • No load power consumption below 0.5W saves standby energy

48 V 150 W industrial power supply

The myVolts HRPG-150-48 delivers a single 48 V output rated at 3.3 A for 150 W continuous power. It accepts a universal AC input range and includes active power factor correction above .95. The unit is built for LED lighting systems and similar constant-voltage loads in industrial or commercial installations.

Capacity and headroom

Maximum output reaches 150 W with efficiency up to 88 % and no-load draw below .5 W. Constant-current limiting protects the supply if the load exceeds 3.3 A, while overload, over-voltage, short-circuit and over-temperature shutdowns prevent damage. A 300 VAC surge withstand for five seconds adds resilience on unstable mains.

Replaces earlier 150 W enclosed supplies

The HRPG series upgrades older non-PFC units by adding active correction and a lower 38 mm profile for 1 U racks. Remote on-off control and remote sense simplify integration into managed cabinets. Buyers who need multiple output voltages or higher current at 48 V should consider a different model.

Kohokohdat

  • High efficiency up to 88% reduces energy waste
  • Active PFC with PF>0.95 improves power quality
  • Withstands 300VAC surge input for 5 seconds
  • Multiple protections include short circuit and overload
  • No load power consumption below 0.5W saves standby energy

Tekniset tiedot

TypeAT

Kysymyksiä tästä tuotteesta

Will the HRPG-150-48 fit alongside my existing AT power supplies in the same rack?

Yes, it uses the AT form factor and a 1U low-profile height of 38 mm, so it occupies the same slot space as standard AT units.

How can I verify the unit is operating correctly once installed?

The built-in active PFC should show a power factor above 0.95, efficiency reaches up to 88 %, and no-load draw stays below 0.5 W; the remote sense and constant-current limiting circuits also indicate normal operation.

What comes in the box and what must I source separately?

The power supply itself is supplied; you will need to provide AC input wiring, DC output cables, and any mounting hardware for your enclosure.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.