Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Rectangular metal PSU with large fan, modular cables, 220V input

myVolts

myVolts Mining Power Supply 1800W 220V 8 GPU

SKU CH-F6WZ-K5TNY

Delivers 1800 W at 220 V to power up to eight GPUs with a 14 cm auto-controlled fan, 95 % conversion rate and 50 °C over-temperature protection

  • TypeAT
  • Supports up to eight graphics cards with sixteen 6+2 pin connectors
  • Auto-thermal fan control and 14 cm large fan keep temperatures low
  • 95 % conversion rate reduces energy waste
  • Metal shell plus dust cover withstand harsh environments
  • High-temperature protection activates at 50 to prevent damage

1800 W Mining Power Supply

This 1800 W AT-type power supply is built for cryptocurrency mining rigs. It delivers power to as many as eight graphics cards from a single unit. The 220 V input requirement means the unit is intended for regions with that mains voltage or for use with a suitable transformer. A 14 cm fan and metal chassis provide cooling and durability.

Suited for multi-GPU mining builds

The sixteen 6+2-pin connectors and eight Sata ports support dense GPU configurations. Builders who need more than eight cards or who run extremely high-power GPUs should plan additional power capacity. The unit includes high-temperature protection that activates above 50 °C. Dust and moisture resistance helps in harsh environments.

220 V input only

The power supply operates exclusively from a 220 V source, so a step-up transformer is required where mains voltage differs. Conversion efficiency is rated at 95 %. Dimensions are 165 x 150 x 86 mm for shelf mounting.

Kohokohdat

  • Supports up to eight graphics cards with sixteen 6+2 pin connectors
  • Auto-thermal fan control and 14 cm large fan keep temperatures low
  • 95 % conversion rate reduces energy waste
  • Metal shell plus dust cover withstand harsh environments
  • High-temperature protection activates at 50 to prevent damage

Tekniset tiedot

TypeAT

Kysymyksiä tästä tuotteesta

Will the 14 cm fan and 95 % conversion rate keep my existing GPU rig cool and efficient?

The 14 cm fan provides strong airflow while the 95 % conversion rate reduces waste heat, so your current graphics cards should run cooler and draw less power from the wall.

How can I confirm the 1800 W unit is running correctly once installed?

After power-up, verify the fan spins smoothly, no high-temperature protection triggers below 50 °C, and all 6+2 pin, Sata and 4+4 pin connectors deliver stable voltage to each GPU.

Which cables come in the box and what must I source separately?

Included are one 24 pin, one 4+4 pin, eight Sata, four big 4 pin and sixteen 6+2 pin cables; a 220 V transformer is not supplied and must be purchased if your mains voltage differs.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.