Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black ATX power supply unit with multiple cables and connectors visible

myVolts

myVolts Power Supply for HP Pavilion 510-P137CB Desktop

SKU CH-V2FM-6VG7Q

Replacement AT power supply for HP Pavilion 510-P137CB desktop with 20+4 pin ATX, 12V 4-pin, 6-pin and three SATA connectors

  • TypeAT
  • Direct replacement for HP Pavilion 510-P137CB desktop
  • Standard 20+4 pin ATX connector powers the motherboard
  • Dedicated +12 V 4-pin connector feeds the CPU
  • Three SATA connectors support multiple drives
  • 6-pin power connector handles graphics card needs

Replacement PSU for HP Pavilion 510-P137CB

This power supply replaces the original unit in the HP Pavilion 510-P137CB desktop. It provides a direct connector match for the motherboard and drive bays. Builders restoring or upgrading this specific chassis will find the pin layout identical to the factory part. No adapter cables are required for installation.

Thermals noise and power draw

The AT form factor fits the existing mounting points and airflow path of the 510 chassis. Standard connectors deliver power without extra adapters that can add resistance or heat. The unit operates within the thermal envelope designed for the original desktop configuration. Acoustic profile matches the stock cooling expectations for this platform.

Upgrade path and when it matters

This PSU suits owners whose original supply has failed or who need additional SATA power for extra drives. It does not add PCIe 8-pin connectors, so graphics cards requiring that interface are not supported. Buyers needing higher wattage for discrete GPU upgrades should verify the power budget before purchase. The 20+4 pin and 4-pin CPU connectors cover the base system requirements.

Kohokohdat

  • Direct replacement for HP Pavilion 510-P137CB desktop
  • Standard 20+4 pin ATX connector powers the motherboard
  • Dedicated +12 V 4-pin connector feeds the CPU
  • Three SATA connectors support multiple drives
  • 6-pin power connector handles graphics card needs

Tekniset tiedot

TypeAT

Kysymyksiä tästä tuotteesta

How do I connect the 20+4 pin ATX and 4-pin +12V cables to the motherboard, and what step is often missed?

Plug the 20+4 pin ATX connector into the main board socket and the 4-pin +12V connector into the CPU power header; the step often missed is seating the 4-pin latch fully until it clicks.

Which cables or connectors may need replacing after extended use?

The three SATA power connectors and the 6-pin power connector are the parts most likely to wear and require replacement over time.

What is the first limitation reached when the supply runs continuously at full load?

The AT form-factor design limits sustained output, so thermal headroom is the first constraint under continuous maximum draw.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.