Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green braided PSU cable extension kit with 24-pin, CPU and GPU connectors and combs

myVolts

myVolts PSU Cable Extension Kit 50cm Green 24-Pin 2x CPU 3x GPU 18AWG

SKU CH-ZYW5-7MH2N

A 50 cm sleeved extension kit with 24-pin ATX, two 4+4-pin CPU and three 6+2-pin GPU cables plus 18 combs in green

  • TypeAT
  • Vivid green sleeving adds a clean professional look to any build
  • 18AWG UL 1015 tinned copper wire resists heat and humidity for long life
  • Kit includes 24-pin ATX, two 4+4-pin CPU and three 6+2-pin GPU extensions
  • High-density braided sleeve balances stiffness and flexibility for easy routing
  • Supplied cable combs keep every wire aligned and tidy inside the case

Extension kit for ATX builds

This 50 cm extension set adds 24-pin motherboard, two 4+4-pin CPU and three 6+2-pin GPU cables to an existing power supply. It suits builders who want to route cables cleanly behind the motherboard tray without replacing the PSU itself. The green braided sleeves give a single accent colour across every connection. Each cable uses 18AWG UL 1015 tinned copper conductors for reliable current delivery.

Braided sleeves and cable combs

High-density braiding makes the cables hold a curve once trained, yet they remain flexible enough to thread through tight grommets. Eighteen cable combs — three for the 24-pin and fifteen for the 8-pin connectors — lock individual wires into parallel lines for a uniform look. The stiff-yet-adaptable temperament means routes stay put after the first build session. No pre-curved shapes are shipped; the installer defines the final bends.

Seventeen colour choices and tested length

The kit is one of seventeen colour options offered in both 30 cm and 50 cm lengths, letting the builder match or contrast other components. All cables were tested with a 3090-class graphics card to confirm connector fit and current handling. Buyers who need longer reach or a different pin count will need a separate solution. The bundled combs eliminate the usual separate purchase for cable management.

Kohokohdat

  • Vivid green sleeving adds a clean professional look to any build
  • 18AWG UL 1015 tinned copper wire resists heat and humidity for long life
  • Kit includes 24-pin ATX, two 4+4-pin CPU and three 6+2-pin GPU extensions
  • High-density braided sleeve balances stiffness and flexibility for easy routing
  • Supplied cable combs keep every wire aligned and tidy inside the case

Tekniset tiedot

TypeAT

Kysymyksiä tästä tuotteesta

What does the 18AWG UL 1015 rating mean for the cables' current handling?

The 18AWG UL 1015 tinned copper wires are rated for higher temperatures and humidity, providing robust current delivery for CPU and GPU power connectors in demanding builds.

How much clearance do the 50cm extensions and included combs need behind the motherboard tray?

Each extension measures 500mm; the kit supplies three 24-pin combs and fifteen 8-pin combs, so allow enough routing depth to seat the combs and manage the braided sleeve's natural stiffness.

In what order should I attach the 4+4 CPU and 6+2 GPU connectors to avoid misaligned pins?

Route the sleeved extensions first, snap the supplied combs onto the cables, then plug the 4+4 CPU and 6+2 GPU ends into the PSU and components — forcing a connector before the comb is seated often bends pins.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.