Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Braided PSU extension cables with ARGB lighting and RGB controller for 8-pin GPU 800-1300W

myVolts

myVolts PSU Extension Cable Kit 8-Pin GPU ARGB RGB Controller 800-1300W

SKU CH-2GE1-B0W01

An 8-pin GPU extension kit with addressable RGB lighting and a controller, compatible with 800 to 1300W power supplies

  • TypeAT
  • Addressable ARGB lighting with multiple colour modes
  • Pure copper cores inside thick PVC and nylon braiding for flexible routing
  • Pre-bent sleeved extensions simplify motherboard cable management
  • Compatible with 800-1300W PSUs from major brands
  • Heat-shrink-free construction ensures stable, high-quality connections

8-Pin GPU ARGB Extension Kit

This PSU extension cable kit adds addressable ARGB lighting to an 8-pin GPU power connection. It is built for PC builders who want a cleaner cable run and a custom light show inside a gaming case. The kit includes a dedicated RGB controller for managing effects without motherboard software.

Thermals Noise and Power Draw

The cables use pure copper cores insulated with thick PVC and a nylon braided sleeve that stays flexible during routing. No active cooling or fans are present so the kit adds zero noise and negligible power draw beyond the LED strip. It is rated for use with power supplies from 800 to 1300 watts.

Upgrade From Standard Cables

This kit replaces the stock black cables that come with a modular PSU when you need individually sleeved, pre-bent extensions for easier cable management. The jump is worth it if you are rebuilding a loop or swapping cases and want ARGB sync without rewiring the PSU itself. Builders who need longer 24-pin or additional 8-pin CPU extensions are not served by this single 8-pin GPU kit.

Kohokohdat

  • Addressable ARGB lighting with multiple colour modes
  • Pure copper cores inside thick PVC and nylon braiding for flexible routing
  • Pre-bent sleeved extensions simplify motherboard cable management
  • Compatible with 800-1300W PSUs from major brands
  • Heat-shrink-free construction ensures stable, high-quality connections

Tekniset tiedot

TypeAT

Kysymyksiä tästä tuotteesta

How do I install the 8-pin GPU extension cables without stressing the connectors?

Route the braided sleeves gently around sharp edges; the pure copper core with thick PVC insulation and nylon wrap is flexible, but forcing tight bends near the 8-pin plugs can pinch the internal wires.

What upkeep will the ARGB lighting and sleeving need over time?

Dust the nylon braid with compressed air every few months; the heat-shrink-free joints and addressable LED strip have no user-serviceable parts, so no re-sleeving or controller firmware updates are required.

At what power draw does voltage drop become noticeable on these extensions?

The kit is rated for 800 to 1300 W supplies; sustained loads near the upper end will show the first measurable voltage drop across the added cable length.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.