Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

myVolts

myVolts RSP-500-15 500W 15V Power Supply

SKU CH-RF5B-KEEHA

Enclosed 500 W AC/DC supply delivering 15 V at 33.4 A with active PFC, forced-air cooling and remote monitoring for industrial automation

  • TypeAT
  • 500 W single-output enclosed AC/DC power supply
  • Universal 85–264 VAC input with active PFC
  • High efficiency up to 90.5 % reduces heat
  • Forced air cooling by built-in DC fan
  • Remote ON-OFF, remote sense and DC OK signal built in

Industrial 500W 15V Power Supply

The myVolts RSP-500-15 is a 500W single-output enclosed AC/DC power supply delivering 15V at 33.4A. It suits factory automation control apparatus, test and measurement instruments, laser-related machines and burn-in facilities. The unit accepts a universal 85-264Vac input with built-in active PFC function for industrial environments.

Forced-Air Cooling 90.5% Efficiency

Forced air cooling by a built-in DC fan manages thermals during normal operation. High efficiency up to 90.5% reduces waste heat and power draw across the input range. Protections include short circuit, overload, over voltage and over temperature to maintain stable output.

Sustained Load Remote Monitoring

Remote ON-OFF control, remote sense and DC OK signal allow integration into automated factories and power distribution cabinets for continuous duty. The supply operates at ambient temperatures up to 70°C with fan speed control adapting to sustained loads. Three-year warranty covers industrial use cycles.

Kohokohdat

  • 500 W single-output enclosed AC/DC power supply
  • Universal 85–264 VAC input with active PFC
  • High efficiency up to 90.5 % reduces heat
  • Forced air cooling by built-in DC fan
  • Remote ON-OFF, remote sense and DC OK signal built in

Tekniset tiedot

TypeAT

Kysymyksiä tästä tuotteesta

How do I mount and wire the RSP-500-15, and which step causes the most trouble?

Screw the enclosed chassis to a flat metal surface using the four corner holes, then connect live, neutral and earth to the three‑pin input block; the step most installers miss is tightening the DC output terminals to the specified torque so the 33.4 A load cannot loosen them.

What part will need replacement first during continuous operation?

The built‑in DC cooling fan is the only moving component; after several years of 24/7 use at up to 70 °C ambient its bearings wear out and the fan must be swapped to keep forced‑air cooling effective.

At what point does the unit hit its limit under sustained full load?

The 500 W / 15 V output is capped at 33.4 A; if the draw exceeds that, overload protection activates and shuts the supply down until the load drops back within the rated current.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.