Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver aluminium box with terminal screws and voltage adjuster

myVolts

myVolts S-360-12 12V 360W Switching Power Supply

SKU CH-WPRX-TGECN

Delivers 12 V DC at up to 360 W with overload, overvoltage and short-circuit protection for industrial and LED applications

  • TypeAT
  • High efficiency and low DC ripple for stable operation
  • Operates reliably from 0 to 40 °C with long service life
  • High insulation strength ensures safe electrical isolation
  • 100 % full-load burn-in test completed before shipping
  • Short circuit, overload and overvoltage protection built in

12V 360W Industrial Switching Supply

The myVolts S-360-12 delivers a regulated 12V DC output rated up to 360W for industrial automation, LED lighting, CCTV and 3D printer installations. Its aluminium alloy chassis provides passive cooling across a 0 to 40°C operating range. Built-in overload, overvoltage and short-circuit protection engage automatically. CCC, FCC and CE marks confirm compliance with basic safety requirements.

Verify AC input and load before ordering

The unit accepts standard L and N AC mains connections; confirm your local voltage matches the supply rating. Total connected load must stay within the 360W maximum to avoid triggering protection circuits. Mounting orientation should allow free airflow around the aluminium housing to keep internal temperatures inside the specified 0 to 40°C window. Wiring uses screw terminals for L, N, GND, V and ADJ; ensure cable gauges suit the intended current.

Aluminium chassis with screw-terminal wiring

The aluminium alloy body acts as a heatsink and resists corrosion in humid environments up to 95% non-condensing humidity. Screw terminals provide secure connections for AC input, DC output and voltage adjustment without soldering. An ADJ trimmer allows fine-tuning of the 12V output within a narrow range for sensitive loads. The supply passed a 100% full-load burn-in test at the factory. Storage temperature spans -20 to 60°C for spare-unit stocking.

Kohokohdat

  • High efficiency and low DC ripple for stable operation
  • Operates reliably from 0 to 40 °C with long service life
  • High insulation strength ensures safe electrical isolation
  • 100 % full-load burn-in test completed before shipping
  • Short circuit, overload and overvoltage protection built in

Tekniset tiedot

TypeAT

Kysymyksiä tästä tuotteesta

What comes in the package and what else do I need to buy?

The box contains one switching power supply driver. You will need to supply AC input wiring for the L and N terminals and DC output wiring for the GND and V terminals.

How do I decide between the 25W-350W range and the 360W model?

The unit delivers a continuous 360 W at 12 V. Choose it when your load stays near that level; the 25 W to 350 W span in the title simply describes the broader product family.

What does the 12 V output mean once the supply is installed in my machine?

It provides a regulated 12 V DC rail with overload, overvoltage and short-circuit protection, operating from 0 to 40 °C and 0 to 95 % humidity.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.