Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

myVolts

myVolts Server Power Conversion Board 10 x 6Pin 12V 1600W

SKU CH-30E4-K6VCY

Converts a single server PSU into ten 6-pin 12 V connectors delivering up to 1600 W

  • TypeAT
  • Converts one server PSU into ten 6-pin outputs
  • Supports up to 1600W total power delivery
  • Solid-state capacitor filtering for stable voltage
  • Compatible with listed DPS and PS series units
  • No cables included — purchase separately

Server Power Conversion Board 1600W

This board converts compatible server power supplies into ten 6-pin outputs for graphics cards or similar loads. It is aimed at builders and technicians who need high-density 12 V distribution from a single server unit.

Capacity and headroom 1600W

The adapter is tested to deliver up to 1600 W across all ten 6-pin connectors. It handles multiple high-draw cards simultaneously but will saturate if total system draw exceeds that ceiling, requiring a second board or a higher-rated supply.

Interface limits and compatibility

The board accepts common server supplies such as DPS-1200FB A, DPS-1200QB A, PS-2751-5Q and PS-2751-LF-1F among others listed. It does not support DPS-800GB A or HSTNS-PR01 units, and no output cables are included in the package.

Kohokohdat

  • Converts one server PSU into ten 6-pin outputs
  • Supports up to 1600W total power delivery
  • Solid-state capacitor filtering for stable voltage
  • Compatible with listed DPS and PS series units
  • No cables included — purchase separately

Tekniset tiedot

TypeAT

Kysymyksiä tästä tuotteesta

Will this conversion board power my older DPS-1200FB A server supply alongside a modern GPU?

Yes, the board lists DPS-1200FB A among the compatible server units and provides ten 6-pin outputs rated for up to 1600 W total.

How can I confirm the board is delivering stable 12 V power after I connect it?

The board uses firm-state capacitor filtering; verify operation by measuring 12 V at each 6-pin connector with a multimeter while the server supply is running.

Does the package include the 6-pin cables I need for my graphics cards?

No, the box contains only the conversion board itself; all ten 6-pin output cables must be purchased separately.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.