Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver metal rectangular power supply unit, compact form factor

myVolts

myVolts Switch Mode Power Supply DC18V-36V Input 13.8V 45A

SKU CH-0MHY-QWV37

A DC-to-DC converter delivering 13.8 V at 45 A from an 18-36 V vehicle supply with over-voltage and over-current protection

  • TypeAT
  • Stable 13.8 V output protects sensitive radios
  • 18–36 V input range suits vehicle power systems
  • 80 % efficiency reduces heat and power draw
  • 150 mV ripple ensures clean DC for clear audio
  • Metal casing and 488 g weight aid durability

Vehicle Radio Power Supply

This myVolts switch-mode unit converts a DC18V-36V vehicle input to a regulated DC13.8V±0.2V output at 45A. Built-in over-voltage protection at 16V±1.5V and over-current protection at 11A±1A guard connected walkie-talkies from damage. The metal chassis measures 13 x 8.5 x 5 cm and weighs approximately 488g.

Mobile Radio Installers

Installers fitting two-way radios into trucks, buses or mixed-fleet vehicles gain a compact, high-efficiency converter that tolerates a broad input span. The 80% effective rate and 150mV ripple suit voice-grade transmitters, while the AT form factor fits standard mounting points. Buyers needing AC mains operation, multiple output voltages or telecom-grade redundancy should look elsewhere.

Critical Spec 45A Output Current

The 45A continuous rating decides whether this supply can drive your radio stack; exceed it and the 11A±1A protection will trip. Match the radio's peak draw to this figure before purchase, as no parallel or higher-current variant is described.

Kohokohdat

  • Stable 13.8 V output protects sensitive radios
  • 18–36 V input range suits vehicle power systems
  • 80 % efficiency reduces heat and power draw
  • 150 mV ripple ensures clean DC for clear audio
  • Metal casing and 488 g weight aid durability

Tekniset tiedot

TypeAT

Kysymyksiä tästä tuotteesta

How much heat or noise does the 45 A output produce during continuous use?

The unit runs at 80 % effective rate with 150 mV P-P ripple, so waste heat is limited and there is no fan listed in the specifications.

What must I already have to connect this supply to my two-way radio?

You need a vehicle or battery source that delivers 18 V to 36 V DC and a cable with the correct polarity for the radio's DC input.

Will the 13.8 V ±0.2 V output work with older radios that expect a fixed 13.8 V rail?

Yes, the tight ±0.2 V regulation and 16 V ±1.5 V over-voltage protection keep the rail within legacy radio tolerances.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.