Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green rectangular PCB with 24-pin ATX connector, four voltage output terminals, power switch and indicator LEDs

myVolts

myVolts XH-M229 ATX 24-pin benchtop power adapter board

SKU CH-NPRH-0A3CP

A compact 24-pin ATX breakout board delivering 3.3V, 5V, 12V and -12V rails with individual 20A fuses for embedded development

  • TypeAT
  • Quick access to four voltage rails: 3.3 V, 5 V, 12 V and -12 V
  • Built-in power switch and LED indicator for simple bench control
  • Each rail protected by a replaceable 20 A glass fuse
  • Ground binding posts on every output for secure connections
  • Compact 128 × 48 × 30 mm board fits tight workspaces

ATX 24-pin benchtop adapter board

This adapter board connects to a standard ATX power supply through a 24-pin connector and breaks out four regulated voltage rails for bench use. It is designed for developers and hobbyists building embedded systems who need quick access to 3.3 V, 5 V, 12 V and -12 V without soldering. The board measures 128 by 48 by 30 mm and weighs 65 g. An onboard power switch and indicator LED simplify operation during testing.

Four fused output channels with ground posts

Each of the four voltage rails is protected by a replaceable 20 A glass fuse and provides a dedicated ground binding post for secure connections. This arrangement lets you wire multiple sub-circuits independently while keeping the power supply safely enclosed. The fused design reduces the risk of accidental shorts damaging the host power supply or the prototype hardware during development.

Single 24-pin ATX input requirement

The board draws all power from one 24-pin ATX connector and is compatible with partial BTX-type supplies. It cannot operate from a standalone wall adapter or a supply lacking the full 24-pin pinout. Builders who need isolated or adjustable voltages, or who do not have an ATX power supply available, will need a different bench power solution.

Kohokohdat

  • Quick access to four voltage rails: 3.3 V, 5 V, 12 V and -12 V
  • Built-in power switch and LED indicator for simple bench control
  • Each rail protected by a replaceable 20 A glass fuse
  • Ground binding posts on every output for secure connections
  • Compact 128 × 48 × 30 mm board fits tight workspaces

Tekniset tiedot

TypeAT

Kysymyksiä tästä tuotteesta

When will the 20 A glass fuses on each output channel need replacement?

Replace a fuse only after it blows from an over-current event; each channel has its own 20 A fuse so only the affected rail requires a new fuse.

What limits continuous current draw on the 12 V, 5 V, 3.3 V and -12 V rails?

Each rail is protected by a 20 A glass fuse, so sustained current above 20 A on any rail will open that fuse first.

How much heat or noise does the XH-M229 board add when running all day?

The board itself has no fan or active components; all heat and noise come from the ATX supply powering it.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.