Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Six green DDR4 LRDIMM sticks in anti-static packaging

NEMIX RAM

NEMIX RAM 1.5TB (6 x 256GB) DDR4 2933MHz PC4-23400 8Rx4 1.2V 288-PIN ECC LRDIMM Server Memory

SKU CH-D0G3-GYETW

Six 256 GB DDR4 LRDIMMs provide 1.5 TB of ECC server memory at 2933 MHz with CAS 21 and 1.2 V operation

  • Capacity1.5TB (6 x 256GB)
  • SpeedDDR4 2933 (PC4 23400)
  • CAS Latency21
  • Voltage1.2V
  • ECCYes
  • Buffered/RegisteredLoad Reduced
  • 5 TB total capacity from six 256 GB modules
  • DDR4 2933 MHz speed with PC4-23400 bandwidth rating
  • ECC Load Reduced DIMM architecture for server reliability
  • 2 V low-voltage operation reduces power draw
  • 8Rx4 rank configuration maximises density per slot

Server memory kit

This 1.5TB kit contains six 256GB DDR4 LRDIMMs rated at 2933MHz with CAS latency 21. It is built for servers that require ECC load-reduced modules and is not suitable for standard PC computers. Each module operates at 1.2V and uses an 8Rx4 organisation.

Build integration

The 288-pin LRDIMM form factor fits server boards that support DDR4 2933 PC4-23400 load-reduced memory. ECC and the load-reduced design reduce electrical load on the memory controller, freeing signal integrity headroom for large-capacity configurations. Modules use major OEM Samsung, Micron or Hynix components.

Sustained operation

Rated voltage of 1.2V and the load-reduced architecture help maintain stability during extended workloads. ECC corrects single-bit errors on the fly, protecting data integrity over long run times. The 8Rx4 rank structure supports high density without exceeding the controller's electrical limits.

Kohokohdat

  • 5 TB total capacity from six 256 GB modules
  • DDR4 2933 MHz speed with PC4-23400 bandwidth rating
  • ECC Load Reduced DIMM architecture for server reliability
  • 2 V low-voltage operation reduces power draw
  • 8Rx4 rank configuration maximises density per slot

Tekniset tiedot

BrandNEMIX RAM
ModelPart#: ML23400-2584K6-SM-SYS-5019P-M
Part NumberPart#: ML23400-2584K6-SM-SYS-5019P-M
Capacity1.5TB (6 x 256GB)
SpeedDDR4 2933 (PC4 23400)
CAS Latency21
Voltage1.2V
ECCYes
Buffered/RegisteredLoad Reduced
Rank8Rx4
ChipsetMajor OEM Samsung, Micron, Hynix

Kysymyksiä tästä tuotteesta

How does the 8Rx4 rank configuration affect maximum capacity per channel?

Each 256 GB module uses an 8Rx4 organisation, so a single DIMM places eight ranks on the channel; the platform memory controller must support that rank count per slot to reach the full 1.5 TB kit capacity.

What thermal load should be expected from six 1.2 V LRDIMMs running continuously at 2933 MHz?

Six load-reduced modules at 1.2 V draw steady power across all ranks; sustained operation requires server-grade airflow to keep each 288-pin DIMM within its thermal envelope.

Which motherboard features are required for this DDR4 2933 MHz ECC LRDIMM kit to function?

The board must provide DDR4 288-pin slots, registered ECC support, and a memory controller qualified for 8Rx4 load-reduced DIMMs at the PC4-23400 data rate.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.