Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

NEMIX RAM

NEMIX RAM 128GB (16x8GB) DDR4 3200 ECC RDIMM CL22 1.2V memory upgrade

SKU CH-JEM2-B6TVF

A 128 GB DDR4 ECC RDIMM kit of sixteen 8 GB modules running at 3200 MT/s with CL22 latency and 1.2 V operation for compatible ThinkMate Supermicro servers

  • Capacity128GB (16 x 8GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 128 GB total capacity across 16 modules
  • DDR4 3200 speed with PC4-25600 bandwidth
  • ECC registered design protects data integrity
  • 2 V operation reduces power draw
  • 288-pin RDIMM form factor fits compatible ThinkMate servers

128GB DDR4 ECC RDIMM kit

This 128GB kit contains sixteen 8GB DDR4 3200 registered DIMMs with ECC and a CAS latency of CL22. It operates at 1.2V using 1Rx8 organisation and 288-pin form factor. The modules are validated for Thinkmate Supermicro SuperServer platforms including the 620P-TR, 620P-TRT, 220P-C9R and 220P-C9RT.

Replaces lower-capacity or non-ECC memory

Upgrading from smaller RDIMM kits or unbuffered DIMMs adds the error correction and signal buffering required for stable multi-socket server workloads. The jump is worth it when your workloads demand maximum registered capacity per channel and the platform qualified vendor list matches the 220 and 620 series systems listed.

Limited to DDR4 RDIMM slots and qualified platforms

These modules only fit 288-pin DDR4 RDIMM slots and will not work in desktop UDIMM, SO-DIMM or DDR5 sockets. Compatibility is restricted to the specific Thinkmate Supermicro models identified; other servers, workstations or consumer boards are not supported by this kit validation.

Kohokohdat

  • 128 GB total capacity across 16 modules
  • DDR4 3200 speed with PC4-25600 bandwidth
  • ECC registered design protects data integrity
  • 2 V operation reduces power draw
  • 288-pin RDIMM form factor fits compatible ThinkMate servers

Tekniset tiedot

BrandNEMIX RAM
SeriesTHINKMATE Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 3200MHZ ECC RDIMM Registered Server Memory
Part NumberMR25600-818K16
Capacity128GB (16 x 8GB)
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemTHINKMATE
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank1Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content128GB (16X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory KIT

Kysymyksiä tästä tuotteesta

Will the 288-pin RDIMM modules fit the DIMM slots on a THINKMATE Supermicro SuperServer 620P-TR?

Yes, the 288-pin DDR4 RDIMM form factor matches the registered DIMM slots on the listed THINKMATE Supermicro SuperServer models.

What is the correct installation sequence for the 16 modules to avoid a memory configuration error?

Populate all sixteen slots following the motherboard manual channel order; the common mistake is leaving a channel partially filled which prevents the server from posting.

How often should the ECC registered modules be stress-tested after deployment to catch early failures?

Run a full memory diagnostic once after initial install and again after any firmware update; ECC corrects single-bit errors but periodic testing confirms module health.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.