Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two green DDR4 RDIMM sticks without heat spreaders

NEMIX RAM

NEMIX RAM 128GB (2x64GB) DDR4 3200 CL22 ECC RDIMM server RAM

SKU CH-3N9V-ZV8ZB

Two 64 GB DDR4 3200 CL22 ECC registered modules deliver 128 GB at 1.2 V for server workloads

  • Capacity128GB (2 x 64GB)
  • Type288-Pin DDR4 RDIMM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.20V
  • ECCYes

Capacity 128GB (2 x 64GB)

  • 128 GB total capacity from two 64 GB modules
  • ECC registered design protects data integrity in servers
  • DDR4 3200 speed with CL22 latency for responsive throughput
  • 2 V operation reduces power draw under load
  • 288-pin RDIMM form factor fits standard server slots

Server memory kit

This NEMIX RAM kit provides 128GB of DDR4 server memory in a matched pair of 64GB modules. It is designed for servers and workstations that require registered ECC modules for data integrity. The kit suits IT professionals upgrading compatible enterprise platforms. It is not for desktop boards that cannot accept registered DIMMs or systems limited to unbuffered memory.

Registered ECC DDR4 3200 CL22

The decisive specification is the registered ECC RDIMM architecture combined with a DDR4 3200 speed rating and CL22 latency. These modules operate at 1.2V and use a 2Rx4 organisation across 288 pins. A motherboard must explicitly support registered ECC DDR4 RDIMMs for this kit to function. Boards limited to unbuffered or non-ECC memory will not work with these modules.

Straightforward DIMM installation

Installation follows the standard DIMM slot procedure: align the notch, press firmly until the retention clips engage, and verify seating. The modules have no heat spreader, so clearance around tall CPU coolers is not reduced. The most common issue is installing registered ECC RDIMMs into a motherboard that only accepts unbuffered or non-ECC memory, which prevents the system from posting.

Kohokohdat

  • 128 GB total capacity from two 64 GB modules
  • ECC registered design protects data integrity in servers
  • DDR4 3200 speed with CL22 latency for responsive throughput
  • 2 V operation reduces power draw under load
  • 288-pin RDIMM form factor fits standard server slots

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 ECC RDIMM Registered Server Memory
Part NumberMR25600-924K2
Capacity128GB (2 x 64GB)
Type288-Pin DDR4 RDIMM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR4 ECC RDIMM Registered Server Memory Motherboard Compatible

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How does the 3200 speed translate when the kit is installed in a server?

The modules run at DDR4 3200 (PC4-25600) with a CAS latency of 22, delivering the rated bandwidth once the platform enables the matching memory profile.

What does the registered ECC interface mean for compatibility?

This is a 288-pin DDR4 RDIMM with ECC and registered buffering; it requires a server or workstation motherboard that supports registered ECC memory.

Will the two 64 GB sticks fit in a standard 288-pin DIMM slot?

Yes, each module is a 288-pin DDR4 RDIMM measuring the standard height for server DIMM sockets.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.