BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00278925BTC
Varastossa
NEMIX RAM
NEMIX RAM 128GB (4x32GB) DDR5 5600 CL46 1.1V 2Rx8 UDIMM ASRock IMB-A1302 IMB-A1700 memory upgrade
128 GB DDR5 kit with four 32 GB modules running at 5600 MHz CL46 for ASRock IMB-A1302 and IMB-A1700 motherboards
- Capacity128GB (4 x 32GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 128GB total capacity across four 32GB modules
- DDR5 5600 speed for responsive system performance
- Low 1.1V operating voltage reduces power draw
- CL46 latency tuned for stable operation
- Validated for ASRock IMB-A1302 and IMB-A1700 motherboards
Targeted ASRock IMB-A1302 IMB-A1700 Upgrade
This 128GB kit contains four 32GB DDR5 5600 UDIMMs built for ASRock Industrial Micro-ATX motherboards IMB-A1302 and IMB-A1700. Each module runs at 1.1V with CL46 timings and a 2Rx8 organisation. The kit delivers 128GB total capacity in a 288-pin unbuffered non-ECC format.
Suitable for Industrial ASRock Systems Only
The memory is validated for the two listed ASRock Industrial boards and will not suit other platforms. Builders needing ECC error correction, registered modules, lower latency profiles, different voltages or capacities outside 128GB should look elsewhere. Systems requiring heat spreaders or alternative form factors are also not addressed by this kit.
128GB (4x32GB) DDR5 5600 CL46 1.1V 2Rx8 UDIMM
The single specification that decides compatibility is the exact 128GB (4x32GB) DDR5 5600 CL46 1.1V 2Rx8 288-pin unbuffered non-ECC UDIMM configuration matched to ASRock IMB-A1302 and IMB-A1700 motherboards. Only systems accepting this precise combination can use the kit.
Kohokohdat
- 128GB total capacity across four 32GB modules
- DDR5 5600 speed for responsive system performance
- Low 1.1V operating voltage reduces power draw
- CL46 latency tuned for stable operation
- Validated for ASRock IMB-A1302 and IMB-A1700 motherboards
Tekniset tiedot
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-328K4 |
| Capacity | 128GB (4 x 32GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | ASRock Industrial |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 2Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 128GB (4 x 32GB) DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM KIT |
Kysymyksiä tästä tuotteesta
Do I need an ASRock IMB-A1302 or IMB-A1700 motherboard to use this 128GB DDR5 5600 kit?
Yes, the kit is validated for those two ASRock Industrial Micro-ATX boards; other platforms are not guaranteed.
Can I mix these 2Rx8 DDR5 5600 modules with slower DDR5 sticks already in the system?
The board will run all modules at the speed of the slowest installed kit, so faster modules will downclock to match.
How can I verify the memory is running at 5600 MT/s with CL46 after installation?
Check the memory tab in CPU-Z or the BIOS main screen; both should report 5600 MT/s and CL46 timings.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
