Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

NEMIX RAM

NEMIX RAM 128GB (8x16GB) DDR4 2933 CL21 1.2V UDIMM memory upgrade

SKU CH-8AGD-6WWCD

Eight 16 GB DDR4 UDIMMs running at 2933 MHz CL21 1.20 V for Supermicro workstations

  • Capacity128GB (8 x 16GB)
  • SpeedDDR4 2933 (PC4 23400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 128 GB total capacity across eight 16 GB modules
  • DDR4 2933 MHz speed rated as PC4-23400
  • Low 1.20 V operating voltage for efficient power use
  • CL21 CAS latency with 1Rx8 single-rank organisation
  • Validated compatibility with Supermicro C9X299-PGF workstation motherboards

128GB DDR4 kit for Supermicro workstations

This 128GB kit contains eight 16GB unbuffered UDIMM modules built for Supermicro desktop and workstation motherboards such as the MBD-C9X299-PGF. It targets professionals who need maximum memory capacity in a single system without moving to registered or ECC memory. The kit arrives new and ready to install.

Eight modules at 2933 MT/s with CL21 timing

Each 1Rx8 module runs at DDR4 2933 (PC4-23400) with a CAS latency of 21 and operates at 1.20V. The 128GB total provides ample headroom for large datasets, virtual machines and heavy multitasking, while the non-ECC unbuffered design means error correction and registered buffering are not available for mission-critical server workloads.

288-pin UDIMM form factor fits standard DDR4 slots

The modules use the common 288-pin DDR4 UDIMM layout and require no heat spreader, leaving clearance for large CPU coolers. Builders must confirm their motherboard supports eight unbuffered DIMMs at this speed and density, as some platforms limit rank count or maximum capacity per channel.

Kohokohdat

  • 128 GB total capacity across eight 16 GB modules
  • DDR4 2933 MHz speed rated as PC4-23400
  • Low 1.20 V operating voltage for efficient power use
  • CL21 CAS latency with 1Rx8 single-rank organisation
  • Validated compatibility with Supermicro C9X299-PGF workstation motherboards

Tekniset tiedot

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 2933MHZ Non-ECC Unbuffered UDIMM
Part NumberMD23400-618K8
Capacity128GB (8 x 16GB)
SpeedDDR4 2933 (PC4 23400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank1Rx8
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content128GB (8X16GB) DDR4 2933MHZ PC4-23400 1Rx8 1.2V CL21 288-PIN Non-ECC Unbuffered UDIMM KIT

Kysymyksiä tästä tuotteesta

Will the 8×16GB DDR4 2933 CL21 UDIMM kit run alongside my existing DDR4 modules without errors?

The kit is DDR4 2933 CL21 1.20V 1Rx8 unbuffered non-ECC UDIMM. Mixing speeds or ranks can cause the system to downclock or become unstable; use identical modules for best results.

How can I verify the 128GB DDR4 2933 CL21 kit is operating at its rated speed after installation?

Enter the UEFI/BIOS and confirm the memory frequency reads 2933 MT/s (PC4-23400) with CL21 timings at 1.20V. CPU-Z or dmidecode will also show 2933 MHz per module.

What does the 128GB DDR4 2933 CL21 UDIMM kit include and what must I buy separately?

The box contains eight 16GB 288-pin DDR4 UDIMM modules (MD23400-618K8). No heat spreaders, cables, tools or additional parts are included.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.