NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
NEMIX RAM
High-capacity 128GB DDR4 3200 ECC registered DIMM with 4Rx4 organisation for server workloads
This NEMIX RAM module delivers 128 GB of registered DDR4 memory at 3200 MT/s. It uses a 4Rx4 organisation with ECC and operates at 1.20 V. The 288-pin RDIMM form factor fits compatible server and workstation motherboards that support registered ECC DIMMs.
The DDR4 standard caps registered DIMM speed at 3200 MT/s with a nominal 1.2 V supply. Higher frequencies or lower voltages are not defined for this generation. Systems that require faster memory must move to a newer platform that supports DDR5.
The 4Rx4 rank configuration determines whether the memory controller can address the full 128 GB capacity. Some server boards limit the number of ranks per channel or do not support 4Rx4 modules. Verify the motherboard's qualified vendor list before purchase.
| Brand | NEMIX RAM |
|---|---|
| Series | Hynix Series Server Memory |
| Model | Hynix Compatible Server Memory DDR4 RDIMM |
| Part Number | MR25600-744K1 |
| Capacity | 128GB |
| Type | 288-Pin DDR4 RDIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 4Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Features | DDR4 ECC RDIMM Registered Server Memory Motherboard Compatible |
This listing is a single 128GB 288-pin DDR4 RDIMM; choose it when your server board has a free slot and supports 4Rx4 registered ECC modules.
The module runs at 3200 MT/s with CL22 latency at 1.20V, giving the rated PC4-25600 bandwidth when the platform enables that speed.
The 4Rx4 registered ECC design requires a server or workstation motherboard that supports registered DDR4 DIMMs; it will not work in standard desktop boards.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?