NEMIX RAM 128GB DDR5 5600MHz PC5-44800 4Rx4 1.1V CL46 288-PIN ECC Registered RDIMM memory upgrade
- 128GB
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
NEMIX RAM
128GB DDR5 6400 RDIMM with ECC and 4Rx4 registered architecture for Supermicro X14SDW-40C-SP9F servers
This 128GB DDR5-6400 RDIMM is built for the Supermicro X14SDW-40C-SP9F motherboard. The module delivers registered ECC operation at 1.1V with CL52 latency. It targets administrators who need full-capacity population across every slot.
Running at 1.1V keeps power draw low for dense server configurations. The bare-module design without a heat spreader relies on chassis airflow for cooling. Registered buffering reduces electrical load on the memory controller during sustained workloads.
The 4Rx4 organisation and 288-pin RDIMM layout are mandatory for this platform. UDIMM or SODIMM alternatives will not seat or function. Buyers who need a different rank structure or non-ECC memory cannot use this kit.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-744K1 |
| Capacity | 128GB |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 4Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 128GB DDR5 6400MHz PC5-51200 4Rx4 1.1V 288-PIN ECC RDIMM KIT |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Align the module key with the slot notch, press firmly until both latches click, then verify the population order in the motherboard manual because the board requires a specific slot sequence for 4Rx4 registered DIMMs.
No routine maintenance is required; the module has no heat spreader and uses major OEM Samsung, Micron or Hynix chips, so replacement only occurs if a failure is detected via ECC corrected-error counters.
The memory controller's maximum supported capacity per channel and the board's qualified vendor list for 4Rx4 registered DIMMs are the first constraints; exceeding them prevents the kit from running at DDR5 6400.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?