BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00280417BTC
Varastossa
NEMIX RAM
NEMIX RAM 16GB DDR4 2666 CL19 SODIMM for POSIFLEX XT-4015-G2 JIVA Foldable 15 Terminal memory upgrade
Adds 16 GB of DDR4 2666 CL19 SODIMM memory to the POSIFLEX XT-4015-G2 JIVA Foldable 15 terminal
- Capacity16GB
- SpeedDDR4 2666 (PC4 21300)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16 GB capacity lifts multitasking headroom for POS workloads
- DDR4 2666 speed matches the terminal's memory bus
- CL19 latency keeps data access predictable
- 2 V operation reduces power draw and heat
- 260-pin SODIMM form factor fits the XT-4015-G2 slot
System-specific DDR4 SODIMM
This 16 GB DDR4 2666 module is built for the POSIFLEX XT-4015-G2 JIVA Foldable 15 terminal. It uses a 260-pin SODIMM form factor with CL19 latency and 1.2 V operation. The unbuffered non-ECC design matches the original system specification for a direct memory upgrade.
DDR4 2666 speed ceiling
The PC4-21300 interface caps bandwidth at the DDR4 2666 data rate. CL19 timing and 2Rx8 organisation set the latency and rank structure the platform expects. No higher speed or lower latency grades are supported by this terminal's memory controller.
16 GB single-module capacity
One 16 GB stick fills a single SODIMM slot and doubles the typical factory configuration. The 2Rx8 density works within the chipset address limit. Systems needing more than 16 GB total cannot use this module alone.
Kohokohdat
- 16 GB capacity lifts multitasking headroom for POS workloads
- DDR4 2666 speed matches the terminal's memory bus
- CL19 latency keeps data access predictable
- 2 V operation reduces power draw and heat
- 260-pin SODIMM form factor fits the XT-4015-G2 slot
Tekniset tiedot
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 2666MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS21300-628K1 |
| Capacity | 16GB |
| Speed | DDR4 2666 (PC4 21300) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL19 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR4 2666MHZ PC4-21300 2Rx8 1.2V CL19 260-PIN Non-ECC Unbuffered SODIMM |
Kysymyksiä tästä tuotteesta
Should I pick the single 16 GB module or look for a dual-channel kit for the POSIFLEX XT-4015-G2?
The listing is a single 16 GB DDR4 2666 SODIMM; if your terminal has two slots and supports dual-channel, adding a matching second module will double bandwidth, otherwise this one module provides the full 16 GB capacity.
What does the 2666 MHz rating actually deliver inside the JIVA Foldable 15 terminal?
The module runs at DDR4 2666 (PC4-21300) with CL19 latency at 1.20 V, so the terminal's memory controller will operate at that speed and timing without overclocking.
Does the 260-pin DDR4 SODIMM interface limit the maximum speed or capacity I can install?
The 260-pin DDR4 SODIMM form factor supports this 2666 MHz module; any higher-speed DDR4 SODIMM would downclock to the terminal's supported rate, and capacity is limited by the system's chipset and slot count.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 $
0.00283026BTC
Varastossa
