Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green rectangular DDR4 RDIMM module with black chips and gold contacts

NEMIX RAM

NEMIX RAM 16GB DDR4 2666 ECC RDIMM CL19 1.2V 2Rx8 288-Pin Memory Upgrade

SKU CH-4BWF-FDSEE

16 GB DDR4-2666 ECC registered DIMM, CL19 1.2 V, 2Rx8 288-pin for server upgrades

  • Capacity16GB
  • SpeedDDR4 2666 (PC4 21300)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • ECC protection prevents data corruption in critical workloads
  • Registered design reduces electrical load for stable server operation
  • 16 GB capacity expands memory headroom for virtualization
  • 2666 MHz DDR4 speed matches platform specifications
  • 2 V operation lowers power draw per module

16GB DDR4 2666 ECC RDIMM for Micron servers

This registered DIMM adds 16GB of error-correcting DDR4 memory to compatible Micron server and workstation platforms. It operates at 2666MHz with CL19 latency and 1.2V power draw. The 2Rx8 organisation suits multi-channel configurations in enterprise environments.

Replaces non-ECC or slower registered modules

Upgrading from unbuffered or lower-speed RDIMMs is worthwhile when the workload demands data integrity and the motherboard supports registered ECC memory. The jump makes sense for virtualisation hosts, database servers or NAS appliances that must tolerate single-bit errors without crashing.

Verify RDIMM support and slot population rules

Confirm the target system accepts 288-pin DDR4 RDIMMs and that the memory controller supports 2Rx8 modules at 2666MHz. Check the vendor documentation for maximum capacity per channel and required slot-filling order before ordering.

Kohokohdat

  • ECC protection prevents data corruption in critical workloads
  • Registered design reduces electrical load for stable server operation
  • 16 GB capacity expands memory headroom for virtualization
  • 2666 MHz DDR4 speed matches platform specifications
  • 2 V operation lowers power draw per module

Tekniset tiedot

BrandNEMIX RAM
SeriesMicron Server/Workstaion Compatible Series Memory
ModelMicron DDR4 2666MHZ ECC RDIMM Registered Server Memory
Part NumberMR21300-628K1
Capacity16GB
SpeedDDR4 2666 (PC4 21300)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemMICRON
CAS LatencyCL19
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank2Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content16GB (1X16GB) DDR4 2666MHZ PC4-21300 2Rx8 1.2V CL19 288-PIN ECC RDIMM Registered Server Memory

Kysymyksiä tästä tuotteesta

Will this 288-pin DDR4 RDIMM fit a standard server DIMM slot?

Yes, the module uses the 288-pin DDR4 RDIMM form factor and requires a matching registered DIMM slot on a compatible server or workstation motherboard.

What is the correct way to seat this registered ECC module so the register initializes?

Align the notch with the slot key, press straight down until both side latches click shut, then power on so the register can train at 2666 MT/s.

How can I tell if the Samsung, Micron or Hynix chips on this stick are degrading over time?

Monitor the system event log for corrected ECC errors; a rising count indicates the 2Rx8 chips are wearing and the module should be swapped.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.