eshinreal
eshinreal 4 Port Mini PCIe to SATA 3 Expansion Card
- Controller Card
25,99 $
0.00033156BTC
Varastossa
NEMIX RAM
NEMIX RAM 16GB DDR4 2666 ECC UDIMM CL19 1.2V 288-Pin Dell Precision 3930 Rack
16 GB DDR4 ECC UDIMM at 2666 MHz with CL19 latency for Dell Precision 3930 Rack
- Capacity16GB
- SpeedDDR4 2666 (PC4 21300)
- ECCYes
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- ECC protection prevents data errors in critical workloads
- 2666 MHz DDR4 speed delivers responsive system performance
- 2 V operation reduces power draw and heat
- 288-pin UDIMM fits Dell Precision 3930 Rack directly
- 16 GB single module simplifies capacity expansion
16GB DDR4 2666 ECC UDIMM for Dell Precision 3930
This NEMIX RAM module is a 16GB DDR4 2666 ECC UDIMM built for the Dell Precision 3930 Rack workstation. It runs at 1.20V with CL19 latency and uses a 288-pin unbuffered design. Major OEM chips from Samsung, Micron or Hynix provide error-correcting stability for professional workloads. The single stick fits straight into an available UDIMM slot.
Who this suits and who should look elsewhere
IT professionals upgrading a Dell Precision 3930 Rack gain 16GB of ECC-protected DDR4 2666 memory with this module. Builders needing non-ECC memory, registered DIMMs, higher speeds or different pin counts cannot use this part. Systems limited to lower voltages or requiring heat spreaders should also choose another product. Buyers wanting capacities beyond 16GB per slot must select different modules.
Single specification that decides fit
The module is a 288-pin DDR4 ECC UDIMM validated for the Dell Precision 3930 Rack. If the workstation demands ECC unbuffered memory at DDR4 2666 with CL19 timing, this stick matches that requirement. Any system requiring registered memory, non-ECC operation or a different form factor will not accept it.
Kohokohdat
- ECC protection prevents data errors in critical workloads
- 2666 MHz DDR4 speed delivers responsive system performance
- 2 V operation reduces power draw and heat
- 288-pin UDIMM fits Dell Precision 3930 Rack directly
- 16 GB single module simplifies capacity expansion
Tekniset tiedot
| Brand | NEMIX RAM |
|---|---|
| Series | Dell Server/Workstation Compatible Series Memory |
| Model | Dell DDR4 2666MHZ ECC Unbuffered UDIMM |
| Part Number | ME21300-618K1 |
| Capacity | 16GB |
| Speed | DDR4 2666 (PC4 21300) |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Dell |
| CAS Latency | CL19 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 ECC UDIMM |
| Rank | 1Rx8 |
| Features | DDR4 ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR4 2666MHZ PC4-21300 2Rx8 1.2V CL19 288-PIN ECC Unbuffered UDIMM |
Kysymyksiä tästä tuotteesta
Does my Dell Precision 3930 Rack need a DDR4 ECC UDIMM slot to use this 288-Pin module?
Yes, this 16GB DDR4 2666 CL19 1.2V stick fits a 288-Pin ECC UDIMM socket on the Precision 3930 Rack motherboard.
Can I add this 1Rx8 ECC UDIMM alongside older DDR4 2666 modules already in the workstation?
Yes, it will run at 2666MT/s CL19 1.2V with other DDR4 2666 ECC UDIMMs; the system clocks all sticks to the slowest common speed and timing.
How do I confirm the module is detected at 2666MT/s with ECC active after installation?
Check BIOS memory information or run dmidecode on Linux; both will show 16GB DDR4 2666 PC4-21300 ECC UDIMM operating at 1.2V.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
SMUGDESK
SMUGDESK PCIe USB 3.2 Gen 2 Card 10Gbps Type A Type C Type E 19/20Pin
32,99 $
0.00042087BTC
Varastossa
Vszerda
Vszerda UC-087-4P 4-port PCIe x1 to 2 USB 3.0 and 2 USB-C expansion card
23,99 $
0.00030605BTC
Varastossa
Vszerda
Vszerda UC-087-2P 2 Port PCIe x1 to USB-C Expansion Card with 80/120mm Bracket
21,99 $
0.00028053BTC
Varastossa