Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

NEMIX RAM

NEMIX RAM 16GB DDR4 3200 ECC RDIMM CL22 2Rx8 Gigabyte MZ01-CE1 EPYC memory upgrade

SKU CH-26FZ-10HMZ

16 GB DDR4 3200 ECC registered RDIMM for Gigabyte MZ01-CE1 EPYC servers

  • Capacity16GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • ECC protection guards data integrity for critical workloads
  • Registered design stabilises signal quality on dense server boards
  • 3200 MT/s DDR4 speed matches EPYC platform specs
  • 2Rx8 organisation fits Gigabyte MZ01-CE1 memory slots
  • 2 V operation keeps power draw low per module

Server Memory Upgrade

This 16GB DDR4 3200 ECC RDIMM is built for the Gigabyte MZ01-CE1 motherboard running AMD EPYC processors. It delivers registered error-correcting memory for stable operation in server and workstation environments.

Registered DDR4 Limits

The module runs at 1.2V with a CL22 latency and a 2Rx8 organisation across 288 pins. Registered DIMMs add a clock cycle of buffering, so the memory controller must support registered signalling and the platform must be configured for ECC operation.

Compatibility Check

Verify that the Gigabyte MZ01-CE1 system accepts 16GB 2Rx8 RDIMMs at 3200MT/s and that the BIOS is set for ECC registered memory. Confirm the motherboard has an available 288-pin DDR4 slot and that the operating system can address the full capacity.

Kohokohdat

  • ECC protection guards data integrity for critical workloads
  • Registered design stabilises signal quality on dense server boards
  • 3200 MT/s DDR4 speed matches EPYC platform specs
  • 2Rx8 organisation fits Gigabyte MZ01-CE1 memory slots
  • 2 V operation keeps power draw low per module

Tekniset tiedot

BrandNEMIX RAM
SeriesGigabyte Server Motherboard Compatible Series Memory
ModelGigabyte DDR4 3200MHZ ECC RDIMM Registered Server Memory
Part NumberMR25600-628K1
Capacity16GB
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemGigabyte
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank2Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory

Kysymyksiä tästä tuotteesta

Should I pick a single 16GB module or multiple smaller sticks for my Gigabyte MZ01-CE1?

This listing is a single 16GB DDR4 3200 RDIMM. Add one module per available slot to reach your desired total capacity.

What does the 3200 MT/s rating deliver on an EPYC platform?

The module runs at DDR4 3200 (PC4-25600) with CL22 latency, providing the rated throughput when the motherboard and CPU memory controller support that speed.

Does the 288-pin RDIMM interface limit anything on this board?

The 288-pin RDIMM form factor fits the Gigabyte MZ01-CE1 DDR4 slots; registered signalling and ECC are handled by the EPYC memory controller.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.