Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green rectangular DDR5 RDIMM module with black chips no heat spreader 288 pins

NEMIX RAM

NEMIX RAM 16GB DDR5 4800 1Rx8 ECC RDIMM Dell PowerEdge R860

SKU CH-MC0X-ZZW4G

16GB DDR5 4800 ECC registered RDIMM validated for Dell PowerEdge R860 servers

  • Capacity16GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • ECC protection prevents data errors in critical workloads
  • DDR5 4800 speed delivers high bandwidth for demanding applications
  • Registered 1Rx8 architecture maintains signal integrity on dense server boards
  • 10 V operation reduces power draw per module
  • Validated for Dell PowerEdge R860 rack servers

Dell PowerEdge R860 Compatible DDR5 ECC RDIMM

This 16GB registered DDR5 module is built for Dell PowerEdge R860 rack servers that require ECC memory. It operates at 4800MT/s with a CL40 latency and runs at 1.1V. The single-rank 1Rx8 organisation uses major OEM DRAM from Samsung, Micron or Hynix. It targets IT administrators upgrading or repairing mission-critical enterprise systems.

DDR5 4800 PC5-38400 Registered Signal Limit

The registered buffer adds one clock cycle of latency but reduces electrical load on the server memory controller, allowing larger populations per channel. Speed is fixed at the JEDEC base rate of 4800MT/s with PC5-38400 bandwidth; no XMP or overclock profiles are supported on this platform. ECC correction protects data integrity but does not increase raw throughput beyond the rated specification.

288-Pin RDIMM Without Heat Spreader

The bare green PCB fits standard 288-pin DDR5 RDIMM slots and relies on server chassis airflow for cooling. Absence of a heat spreader keeps module height low, avoiding interference with CPU heatsinks or cable routing in dense 1U or 2U racks. Registered signalling and ECC require a compatible motherboard; consumer desktop boards will not recognise or boot with this module.

Kohokohdat

  • ECC protection prevents data errors in critical workloads
  • DDR5 4800 speed delivers high bandwidth for demanding applications
  • Registered 1Rx8 architecture maintains signal integrity on dense server boards
  • 10 V operation reduces power draw per module
  • Validated for Dell PowerEdge R860 rack servers

Tekniset tiedot

BrandNEMIX RAM
SeriesDell Series Server Memory
ModelDell Compatible DDR5 ECC Registered RDIMM
Part NumberMR38400-618K1
Capacity16GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR5 ECC Registered Server Motherboard Compatible

Kysymyksiä tästä tuotteesta

Is the 16 GB DDR5 4800 module the right capacity for my Dell PowerEdge R860?

The 16 GB DDR5 4800 module matches the listed capacity and speed for the Dell PowerEdge R860, giving one 1Rx8 registered DIMM per slot.

What does the 4800 MT/s speed deliver once the module is installed in the server?

The module runs at DDR5 4800 (PC5-38400) with CL40 latency at 1.1 V, providing the rated throughput for registered ECC workloads.

Does the 288-pin RDIMM interface limit the memory bandwidth in the R860?

The 288-pin DDR5 RDIMM interface operates at the specified 4800 MT/s; registered buffering and ECC are handled on-module per the server's memory controller.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.