Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

NEMIX RAM

NEMIX RAM 16GB DDR5 5600 CL46 288-Pin UDIMM memory upgrade

SKU CH-95CG-D0ZYC

16 GB DDR5 desktop memory running at 5600 MT/s with CL46 latency and 1.1 V operation

  • Capacity16GB
  • SpeedDDR5 5600 (PC5 44800)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 16 GB DDR5 5600 MHz boosts desktop responsiveness
  • CL46 latency at 1.10 V keeps power draw low
  • 288-pin UDIMM fits standard desktop DIMM slots
  • 1Rx8 single-rank layout simplifies memory controller load
  • Samsung, Micron or Hynix chips ensure reliable operation

NEMIX RAM 16GB DDR5 5600 Module

This 16GB DDR5 module runs at 5600 MT/s with a CAS latency of 46 and operates at 1.1V. It uses a 288-pin UDIMM form factor and is built with unbuffered, non-ECC chips from major OEM suppliers. The single-rank 1Rx8 design targets desktop systems that support DDR5 memory.

Builders with MSI Z790 Project Zero boards

The module is validated for the MSI Z790 Project Zero motherboard and carries the manufacturer's MSI Gaming Motherboard Compatible Series designation. Buyers who need ECC error correction or registered signal buffering should look elsewhere, as this stick provides neither feature.

5600 MT/s DDR5 speed rating

The decisive specification is the DDR5 5600 (PC5-44800) speed grade paired with CL46 latency at 1.1V. Systems that require a different data rate, voltage or latency profile will not match this module's programmed SPD settings.

Kohokohdat

  • 16 GB DDR5 5600 MHz boosts desktop responsiveness
  • CL46 latency at 1.10 V keeps power draw low
  • 288-pin UDIMM fits standard desktop DIMM slots
  • 1Rx8 single-rank layout simplifies memory controller load
  • Samsung, Micron or Hynix chips ensure reliable operation

Tekniset tiedot

BrandNEMIX RAM
SeriesMSI Gaming Motherboard Compatible Series Memory
ModelMSI DDR5 5600MHZ Non-ECC Unbuffered UDIMM
Part NumberMD44800-618K1
Capacity16GB
SpeedDDR5 5600 (PC5 44800)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemMSI
CAS LatencyCL46
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR5 5600MHZ PC5-44800 1Rx8 1.1V CL46 288-PIN Non-ECC Unbuffered UDIMM

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Should I choose the 16 GB stick or add a second one for dual-channel?

The module is sold as a single 16 GB stick; adding a second identical stick will enable dual-channel on the MSI Z790 Project Zero board.

What does the 5600 MT/s rating deliver on the MSI Z790 Project Zero motherboard?

It runs at the standard 5600 MT/s JEDEC speed with CL46 latency at 1.10 V, giving the baseline DDR5 throughput for that platform.

How does the DDR5 288-pin UDIMM interface limit performance on this board?

The 288-pin DDR5 UDIMM slot caps the module at 5600 MT/s and 1.10 V, so the kit cannot exceed the JEDEC 5600 specification.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.