Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green bare circuit board DDR5 memory module with black chips and gold edge connector

NEMIX RAM

NEMIX RAM 16GB DDR5 5600 ECC UDIMM CL46 1Rx8 memory upgrade

SKU CH-2G4P-YC1KV

A 16GB DDR5 ECC UDIMM running at 5600MT/s with CL46 latency for Micron-compatible systems

  • Capacity16GB
  • SpeedDDR5 5600 (PC5 44800)
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 16 GB capacity expands server memory headroom
  • DDR5 5600 speed delivers high data throughput
  • ECC protection corrects single-bit errors automatically
  • 1 V operation reduces power draw per module
  • 288-pin UDIMM fits standard DDR5 server slots

NEMIX RAM 16GB DDR5 5600 ECC UDIMM

This 16GB DDR5 module runs at 5600 MT/s with CL46 latency and 1.10V operation. It uses a 288-pin unbuffered UDIMM form factor with on-die ECC and a 1Rx8 rank layout. The stick is built with major OEM chips and carries the Micron-compatible part number ME44800-618K1 for verified compatibility. No heat spreader is fitted.

Suits Micron DDR5 platforms needing ECC unbuffered

This module fits Micron-based servers or workstations that require DDR5 5600 ECC UDIMMs in a single 16GB rank. Buyers whose systems demand registered RDIMMs or non-ECC UDIMMs should look elsewhere. Builders needing higher density per slot or lower CL timings will not meet those requirements here. Voltage is fixed at 1.10V with no XMP profiles.

DDR5 5600 CL46 1.10V 288-pin ECC UDIMM spec

The decisive spec is the DDR5 5600 CL46 1.10V 288-pin ECC unbuffered UDIMM standard. Only motherboards that explicitly support this exact speed, latency, voltage, pin count and ECC type will operate correctly. Verify the platform memory QVL before purchase. No other DDR generation or form factor will fit.

Kohokohdat

  • 16 GB capacity expands server memory headroom
  • DDR5 5600 speed delivers high data throughput
  • ECC protection corrects single-bit errors automatically
  • 1 V operation reduces power draw per module
  • 288-pin UDIMM fits standard DDR5 server slots

Tekniset tiedot

BrandNEMIX RAM
SeriesMicron Server/Workstaion Compatible Series Memory
ModelMicron DDR5 5600MHZ ECC Unbuffered UDIMM
Part NumberME44800-618K1
Capacity16GB
SpeedDDR5 5600 (PC5 44800)
ECCYes
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemMICRON
CAS LatencyCL46
Heat SpreaderNo
Type288-Pin DDR5 ECC UDIMM
Rank1Rx8
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR5 5600MHZ PC5-44800 1Rx8 1.1V CL46 288-PIN ECC Unbuffered UDIMM

Kysymyksiä tästä tuotteesta

How does the CL46 latency affect sustained throughput?

CL46 is the CAS latency rating at DDR5 5600 speed; the module runs at 1.10 V with a single 1Rx8 rank for stable sustained performance.

What thermal or power behaviour should I expect during all-day operation?

The UDIMM has no heat spreader and operates at the standard DDR5 1.10 V, so power draw and heat stay within normal JEDEC limits for continuous use.

Which motherboard feature must I already have for this ECC UDIMM to function?

Your motherboard must support 288-pin DDR5 ECC unbuffered memory; without that capability the module will not work.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.