Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

NEMIX RAM

NEMIX RAM 1TB (4 x 256GB) DDR4 2933MHz 8Rx4 ECC RDIMM server RAM

SKU CH-SDTT-N8XHY

A 1TB registered ECC DDR4 server memory kit comprising four 256GB modules running at 2933MHz with CAS latency 21

  • Capacity1TB (4 x 256GB)
  • SpeedDDR4 2933 (PC4 23400)
  • CAS Latency21
  • Voltage1.2V
  • ECCYes
  • Buffered/RegisteredRegistered
  • Massive 1 TB capacity from four 256 GB modules
  • DDR4 2933 MHz speed for high-throughput server workloads
  • ECC registered design detects and corrects data errors
  • Low 1.2 V operation reduces power draw per module
  • Built with major OEM chips from Samsung Micron or Hynix

1 TB DDR4-2933 ECC RDIMM kit

This 1 TB kit consists of four 256 GB DDR4-2933 registered DIMMs with ECC and an 8Rx4 organisation. It is built for enterprise servers that require registered error-correcting memory at the PC4-23400 data rate. The modules are not compatible with standard desktop or laptop platforms.

Verify DDR4 RDIMM support and 288-pin slots

Before ordering, confirm that the target server accepts 288-pin DDR4 registered DIMMs and can address 256 GB modules at the 2933 MT/s speed. The platform must also support 8Rx4 rank configurations and 1.2 V operation for the kit to function correctly.

Sustained load behaviour with registered ECC

Under continuous workloads the registered buffer reduces electrical load on the memory controller while ECC corrects single-bit errors on the fly. The 8Rx4 organisation distributes accesses across ranks, helping maintain stable throughput during long-running compute or virtualisation tasks.

Kohokohdat

  • Massive 1 TB capacity from four 256 GB modules
  • DDR4 2933 MHz speed for high-throughput server workloads
  • ECC registered design detects and corrects data errors
  • Low 1.2 V operation reduces power draw per module
  • Built with major OEM chips from Samsung Micron or Hynix

Tekniset tiedot

BrandNEMIX RAM
ModelPart#: MR23400-2584K4-SM-SYS-5019P-M
Part NumberPart#: MR23400-2584K4-SM-SYS-5019P-M
Capacity1TB (4 x 256GB)
SpeedDDR4 2933 (PC4 23400)
CAS Latency21
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank8Rx4
ChipsetMajor OEM Samsung, Micron, Hynix

Kysymyksiä tästä tuotteesta

Does the kit include all four 256GB modules or must any be purchased separately?

The kit contains four 256GB modules for a total of 1TB; no additional modules are required.

Should I choose this 1TB kit or a smaller capacity for my server?

Choose the 1TB kit when your workload needs maximum capacity across four slots; select a smaller kit if fewer slots or less memory are required.

What does the 2933MHz rating mean once the memory is installed?

The modules run at DDR4 2933MHz (PC4-23400) with CAS latency 21 at 1.2V, delivering the rated speed when the server platform supports it.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.