Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Eight green DDR5 RDIMM sticks in a row

NEMIX RAM

NEMIX RAM 1TB 8x128GB DDR5 4800 CL40 ECC RDIMM Dell Precision 7960 memory upgrade

SKU CH-3W5S-P87ZY

Eight 128 GB DDR5 4800 CL40 ECC registered modules add 1 TB to Dell Precision 7960 workstations

  • Capacity1TB (8 x 128GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 1TB capacity with eight 128GB modules for large workloads
  • DDR5 4800 speed rated at PC5-38400 for high throughput
  • ECC registered RDIMM with 4Rx4 organisation for data integrity
  • CL40 CAS latency at 1.1V for efficient operation
  • 288-pin DDR5 form factor validated for Dell Precision 7960

Capacity & configuration

This kit delivers 1 TB of DDR5 memory in eight 128 GB registered DIMMs. Each module runs at 4800 MT/s with CL40 latency and operates at 1.1 V. The 4Rx4 organisation and ECC support are built for data-integrity workloads on the Dell Precision 7960 rack or tower workstation.

Suited workloads & limits

The kit targets professionals who need maximum registered ECC capacity for virtualisation, large datasets or scientific computing on the validated platform. It does not suit systems that require unbuffered UDIMMs, non-ECC memory, lower-density modules or a different DDR generation.

Build integration

The 288-pin RDIMMs plug directly into the workstation’s DDR5 slots and draw 1.1 V, leaving headroom for the platform’s power delivery. Registered signalling reduces electrical load on the memory controller, freeing it to manage the full 1 TB configuration without additional buffering hardware.

Kohokohdat

  • 1TB capacity with eight 128GB modules for large workloads
  • DDR5 4800 speed rated at PC5-38400 for high throughput
  • ECC registered RDIMM with 4Rx4 organisation for data integrity
  • CL40 CAS latency at 1.1V for efficient operation
  • 288-pin DDR5 form factor validated for Dell Precision 7960

Tekniset tiedot

BrandNEMIX RAM
SeriesDell Server/Workstation Compatible Series Memory
ModelDell DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-744K8
Capacity1TB (8 x 128GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemDell
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank4Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content1TB (8X128GB) DDR5 4800MHZ PC5-38400 4Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Kysymyksiä tästä tuotteesta

What motherboard slot does the 288-pin DDR5 RDIMM require on the Dell Precision 7960?

The kit uses 288-pin DDR5 RDIMM modules that install directly into the Precision 7960's DDR5 memory slots; no adapter or converter is needed.

Can I mix these 4Rx4 CL40 modules with existing 2Rx8 or 1Rx4 sticks in the same workstation?

Mixing different rank configurations or CAS latencies is not recommended; for stable operation populate all channels with identical 4Rx4 CL40 modules.

How do I confirm the full 1 TB is recognised and ECC is active after installation?

Enter the system BIOS or run a memory diagnostic; the firmware should show 1 TB total capacity with ECC status reported as enabled.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.