Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Eight green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM 1TB 8x128GB DDR5 5600 ECC RDIMM 4Rx4 CL46 1.1V 288-pin Dell PowerEdge XE9685L memory upgrade

SKU CH-FPYD-QMY8T

Eight 128 GB DDR5 5600 ECC registered DIMMs add 1 TB to a Dell PowerEdge XE9685L server

  • Capacity1TB (8 x 128GB)
  • SpeedDDR5 5600 (PC5 44800)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V

Size 1TB 8X128GB

Näytä 6 muuta kokoonpanoa

Speed 5600MHz

  • 1TB total capacity across eight 128GB modules
  • DDR5 5600 speed for high-throughput server workloads
  • ECC registered design protects data integrity
  • 1V operation reduces power draw per module
  • Validated for Dell PowerEdge XE9685L rack servers

System-specific 1 TB kit

This 1 TB memory kit contains eight 128 GB DDR5 ECC RDIMM modules built for the Dell PowerEdge XE9685L rack server. Registered buffering and on-die ECC protect data integrity in enterprise workloads. The 288-pin form factor matches the platform's memory slots exactly. No heat spreaders are included, so airflow management follows the server's original design.

Thermals and power at 1.1 V

Each module operates at 1.10 V, the standard DDR5 voltage for registered DIMMs at this speed. Lower voltage reduces per-module heat output compared with higher-voltage alternatives. Passive cooling relies on the chassis fans directed across the DIMM rows. Power draw scales with the eight-module population and the 5600 MT/s data rate.

Sustained load behaviour

CL46 latency and the 4Rx4 rank structure support steady throughput during extended compute tasks. Registered signalling helps maintain signal quality across all populated channels under continuous utilisation. The kit is validated for compatibility with the target server platform to avoid training failures during prolonged operation. Capacity remains fixed at 1 TB unless modules are added or removed.

Kohokohdat

  • 1TB total capacity across eight 128GB modules
  • DDR5 5600 speed for high-throughput server workloads
  • ECC registered design protects data integrity
  • 1V operation reduces power draw per module
  • Validated for Dell PowerEdge XE9685L rack servers

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-744K8
Capacity1TB (8 x 128GB)
SpeedDDR5 5600 (PC5 44800)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemDell
CAS LatencyCL46
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank4Rx4
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1TB (8 x 128GB) DDR5 5600MHz PC5-44800 4Rx4 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How do I install the eight 128GB DDR5 RDIMMs into the PowerEdge XE9685L, and which step is often missed?

Power down the server, open the chassis, and seat each 288-pin module fully until the ejector clips click; the step most people skip is verifying the memory configuration in the BIOS after the first boot so the 1TB kit is recognised correctly.

What maintenance or replacement will this 1TB DDR5 ECC kit need over its service life?

The registered DDR5 modules have no moving parts and require no scheduled maintenance; replacement is only necessary if a module fails, which is covered by the manufacturer's lifetime replacement warranty.

What limit appears first when the 4Rx4 DDR5 5600 memory runs under sustained load?

The CAS latency of CL46 at 5600 MT/s sets the timing boundary, so sustained workloads will hit latency constraints before the 1.1V voltage or registered buffer become limiting factors.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.