Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two green DDR4 RDIMM sticks with black heat spreaders and gold contacts

NEMIX RAM

NEMIX RAM 256GB (2 x 128GB) DDR4 2933 PC4-23400 4Rx4 ECC RDIMM server RAM

SKU CH-ZPA0-YJFHK

Dual 128 GB registered ECC DDR4 modules at 2933 MHz with 4Rx4 organisation for high-density server workloads

  • Capacity256GB (2 x 128GB)
  • SpeedDDR4 2933 (PC4 23400)
  • CAS Latency21
  • Voltage1.2V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 256 GB total capacity from two 128 GB modules for large server workloads
  • DDR4 2933 MT/s speed rated at PC4-23400 for high-throughput applications
  • ECC and registered design protects data integrity in mission-critical systems
  • 4Rx4 organisation maximises density per DIMM slot on compatible platforms
  • 2 V operation reduces power draw while maintaining 2933 MT/s performance

Server-grade DDR4 kit for high-capacity workloads

This 256 GB kit contains two 128 GB registered ECC modules rated at DDR4 2933 (PC4-23400). It is built for servers and workstations that require error-correcting memory and registered signalling. Standard desktop PCs cannot use these modules.

Registered design with 4Rx4 organisation

Each module uses a 4Rx4 layout and operates at 1.2 V through a 288-pin RDIMM interface. The registered buffer reduces electrical load on the memory controller, allowing higher densities per channel. CAS latency is 21 cycles at the rated speed.

DDR4 2933 bandwidth ceiling limits peak throughput

The PC4-23400 rating sets a maximum theoretical transfer rate that cannot be exceeded by this kit. Systems needing higher memory bandwidth must move to a faster DDR4 grade or a newer memory generation. Capacity per module is fixed at 128 GB, so expanding beyond 256 GB requires additional DIMM slots.

Kohokohdat

  • 256 GB total capacity from two 128 GB modules for large server workloads
  • DDR4 2933 MT/s speed rated at PC4-23400 for high-throughput applications
  • ECC and registered design protects data integrity in mission-critical systems
  • 4Rx4 organisation maximises density per DIMM slot on compatible platforms
  • 2 V operation reduces power draw while maintaining 2933 MT/s performance

Tekniset tiedot

BrandNEMIX RAM
ModelPart#: MR23400-744K2-SM-SYS-5019P-M
Part NumberPart#: MR23400-744K2-SM-SYS-5019P-M
Capacity256GB (2 x 128GB)
SpeedDDR4 2933 (PC4 23400)
CAS Latency21
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
ChipsetMajor OEM Samsung, Micron, Hynix

Kysymyksiä tästä tuotteesta

Does DDR4 2933 PC4-23400 limit the bus speed to 2933 MT/s?

Yes, the DDR4 2933 rating means the modules run at up to 2933 MT/s, which corresponds to the PC4-23400 bandwidth specification.

Will these 288-pin ECC RDIMMs fit a standard server DIMM slot?

Yes, each 128 GB module uses the 288-pin DDR4 RDIMM form factor, so they install in any server board with matching DDR4 RDIMM slots.

How are the two 128 GB sticks installed, and what step is often missed?

Power down the server, open the chassis, align each module's notch with the slot key, press firmly until the retention clips click, then verify in BIOS that all 256 GB are recognised at 2933 MT/s.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.