Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

NEMIX RAM

NEMIX RAM 256GB (2x128GB) DDR5 4800 ECC RDIMM Server RAM

SKU CH-QPH4-QSF79

A 256 GB DDR5 server kit of two 128 GB ECC registered DIMMs running at 4800 MT/s with CL40 latency and 1.1 V operation

  • Capacity256GB (2 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 256 GB total capacity from two 128 GB modules
  • DDR5 4800 MT/s speed rated at PC5-38400 bandwidth
  • ECC registered design detects and corrects single-bit errors
  • Low 1.10 V operating voltage reduces server power draw
  • Built with major OEM Samsung Micron Hynix DRAM chips

256GB DDR5 ECC RDIMM Kit

This 256GB kit contains two 128GB DDR5 ECC RDIMM modules built for servers and workstations that require registered memory with error correction. The 4Rx4 organisation and 1.10V operating voltage target enterprise platforms designed for high-density memory configurations. Buyers deploying virtualisation hosts, database nodes or compute clusters will match the capacity and reliability profile.

Platform Requirements Check

Verify that your motherboard supports DDR5 RDIMM modules, registered operation and 4Rx4 rank density at 4800 MT/s. The memory controller must accept 288-pin ECC registered DIMMs at 1.10V and the BIOS must be current enough to initialise the full 256GB capacity. Systems limited to UDIMM, lower rank counts or slower speeds will not post with this kit.

Build Integration

The modules occupy two DIMM slots and leave remaining channels free for further expansion up to the platform limit. Registered buffering reduces electrical load on the memory controller, helping stability when all slots are populated. No heat spreaders are fitted, so airflow across the bare PCBs must be provided by the server chassis cooling design.

Kohokohdat

  • 256 GB total capacity from two 128 GB modules
  • DDR5 4800 MT/s speed rated at PC5-38400 bandwidth
  • ECC registered design detects and corrects single-bit errors
  • Low 1.10 V operating voltage reduces server power draw
  • Built with major OEM Samsung Micron Hynix DRAM chips

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-744K2
Capacity256GB (2 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR5 ECC Registered Server Memory Motherboard Compatible

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Does the 256 GB kit include two 128 GB modules or do I need to buy extra sticks?

The kit ships with two 128 GB DDR5 RDIMM modules for a total of 256 GB.

Should I choose the 4Rx4 4800 MT/s version or a different rank and speed?

This kit is 4Rx4 at 4800 MT/s; select it when your server requires registered ECC DDR5 at that rank and data rate.

What does the CL40 latency mean once the memory is installed in a server?

CL40 indicates 40 clock cycles of CAS latency at the rated 4800 MT/s speed, which the memory controller uses for timing.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.