Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two green DDR5 RDIMM modules without heat spreaders, 288-pin, 256GB kit

NEMIX RAM

NEMIX RAM 256GB 2x128GB DDR5 6400 CL52 1.1V ECC Registered RDIMM Kit memory upgrade

SKU CH-E3Q4-RQTT4

A 256GB DDR5 6400 ECC registered RDIMM kit built to the exact rank, voltage and timing the Supermicro H14SST-GE expects

  • Capacity256GB (2 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 256 GB kit lets the Supermicro H14SST-GE run at full capacity
  • DDR5-6400 CL52 timing matches the board's memory controller for rated speed
  • Registered ECC architecture offloads the controller and corrects single-bit errors on the fly
  • 10 V operation at 2Rx4 rank aligns with the motherboard's population rules
  • Lifetime replacement warranty with US-based technical support backs the upgrade

Capacity and Compatibility

This 256GB kit contains two 128GB DDR5 RDIMMs built for servers that require Registered ECC memory. It is designed for the Supermicro H14SST-GE motherboard and matches the board's population rules.

Registered ECC Architecture

The modules run at DDR5 6400 with CL52 latency at 1.10V using a 2Rx4 organization. Registered buffering reduces electrical load on the memory controller so every slot can be fully populated at rated speed while ECC corrects single-bit errors.

Server Build Integration

The 288-pin RDIMM form factor fits only boards wired for Registered DDR5, not UDIMM or SODIMM slots. Verify your system manual for approved capacities and DIMM order before installation.

Kohokohdat

  • 256 GB kit lets the Supermicro H14SST-GE run at full capacity
  • DDR5-6400 CL52 timing matches the board's memory controller for rated speed
  • Registered ECC architecture offloads the controller and corrects single-bit errors on the fly
  • 10 V operation at 2Rx4 rank aligns with the motherboard's population rules
  • Lifetime replacement warranty with US-based technical support backs the upgrade

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-724K2
Capacity256GB (2 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 2X128GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Kysymyksiä tästä tuotteesta

What does the 6400 MT/s rating mean once the kit is installed in the Supermicro H14SST-GE?

The modules run at DDR5 6400 (PC5 51200) with CL52 latency at 1.10 V, so the memory controller sees the rated speed and timings without manual tuning.

How does the 288-pin RDIMM interface and registered design affect maximum capacity on this board?

The 288-pin Registered DIMM form factor is what the H14SST-GE requires; the registered architecture lets the board run every slot fully populated at 256 GB total without overloading the memory controller.

What physical clearance do the 128 GB modules need inside the server chassis?

Each 288-pin RDIMM has no heat spreader, so standard DIMM-slot height clearance is sufficient; verify the motherboard manual for population order before installing the 2x128 GB kit.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.