Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Eight green DDR4 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 256GB (8 x 32GB) DDR4 3200 CL22 ECC Registered RDIMM memory upgrade

SKU CH-WZVY-13TBQ

256 GB server kit with eight 32 GB DDR4 3200 RDIMMs, CL22, 1.2 V, registered ECC for Supermicro X12SPT-G and X12SPT-GC

  • Capacity256GB (8 x 32GB)
  • Type288-Pin DDR4 RDIMM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.20V
  • ECCYes

Size 256GB 8X32GB

Näytä 8 muuta kokoonpanoa
  • 256 GB total capacity from eight 32 GB modules
  • DDR4-3200 speed rated at PC4-25600 for server workloads
  • Registered ECC design corrects single-bit errors and stabilises full-slot populations
  • CL22 latency at 1.20 V matches controller timing exactly
  • 288-pin RDIMM form factor verified for Supermicro X12SPT-G / X12SPT-GC motherboards

Exact-match 256 GB DDR4 kit for Supermicro X12SPT-G

This NEMIX RAM kit delivers 256 GB as eight 32 GB DDR4-3200 RDIMMs running at 1.20 V with CL22 latency. Registered ECC modules are purpose-built for the Supermicro X12SPT-G and X12SPT-GC motherboards, matching the required 288-pin RDIMM form factor and 2Rx8 rank structure so the memory controller recognises full capacity at rated speed.

Sustained-load stability

Registered buffering offloads the memory controller, allowing all eight slots to remain fully populated at 3200 MT/s without signal degradation during continuous operation. ECC circuitry detects and corrects single-bit errors in real time, preventing silent data corruption and unplanned reboots that would otherwise interrupt production workloads.

No heat spreaders and strict population rules

Modules ship without heat spreaders, relying on chassis airflow for cooling in dense server configurations. The 288-pin RDIMM keying prevents accidental installation in UDIMM or SODIMM slots, and the kit must be installed following the motherboard manual's approved population order to ensure compatibility.

Kohokohdat

  • 256 GB total capacity from eight 32 GB modules
  • DDR4-3200 speed rated at PC4-25600 for server workloads
  • Registered ECC design corrects single-bit errors and stabilises full-slot populations
  • CL22 latency at 1.20 V matches controller timing exactly
  • 288-pin RDIMM form factor verified for Supermicro X12SPT-G / X12SPT-GC motherboards

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR4 ECC RDIMM Registered Server Memory
Part NumberMR25600-328K8
Capacity256GB (8 x 32GB)
Type288-Pin DDR4 RDIMM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 ECC RDIMM Motherboard Compatible
Package Content256GB 8X32GB DDR4 3200MHz PC4-25600 2Rx8 1.2V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How much heat and power will the 1.2V 2Rx8 registered DIMMs add when the server runs continuously?

Each module operates at 1.2V with standard DDR4 power draw; the registered design reduces electrical load on the memory controller so all eight slots can stay populated without extra voltage or active cooling.

What must the motherboard provide for this 288-pin RDIMM kit to function?

The board needs DDR4 RDIMM slots that support registered ECC memory, a 2Rx8 rank structure and the PC4-25600 speed grade; the Supermicro X12SPT-G and X12SPT-GC are validated platforms.

Will the CL22 timing cause issues if I mix these modules with existing DDR4 RDIMMs in the same system?

The memory controller will negotiate a common speed and latency; all populated channels run at the slowest module's rated timing, so existing RDIMMs stay compatible at the lowered setting.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.