Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

NEMIX RAM

NEMIX RAM 256GB (8x32GB) DDR4 2400 CL17 ECC RDIMM ROMED8-2T EPYC memory upgrade

SKU CH-76V6-WAVRV

256GB DDR4 2400 CL17 ECC registered kit with eight 32GB 2Rx4 modules at 1.2V for ASRock Rack EPYC motherboards

  • Capacity256GB (8 x 32GB)
  • SpeedDDR4 2400 (PC4 19200)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V

Capacity 256GB 8X32GB

  • 256 GB total capacity from eight 32 GB modules
  • ECC registered design protects data integrity in servers
  • CL17 latency at 2400 MHz DDR4 speed
  • 2 V operation reduces power draw
  • 288-pin RDIMM form factor fits EPYC motherboards

256GB DDR4 ECC RDIMM kit for EPYC servers

This 256GB kit contains eight 32GB DDR4 2400 registered DIMMs built for the ASRock Rack ROMED8-2T motherboard. It targets IT professionals who need validated ECC memory for AMD EPYC server platforms.

288-pin RDIMM installation and population rules

Modules install in the standard 288-pin DDR4 slots and operate at 1.2V with CL17 timing. Registered 2Rx4 organisation requires correct population order per the motherboard manual; mismatched ranks or speeds will prevent boot or degrade stability.

Eight-module 256GB capacity with 2Rx4 registered ECC

The single specification that decides fit is the 256GB (8x32GB) 2Rx4 registered ECC configuration running at DDR4 2400. Systems needing a different rank structure, non-ECC memory, or a smaller maximum capacity cannot use this kit.

Kohokohdat

  • 256 GB total capacity from eight 32 GB modules
  • ECC registered design protects data integrity in servers
  • CL17 latency at 2400 MHz DDR4 speed
  • 2 V operation reduces power draw
  • 288-pin RDIMM form factor fits EPYC motherboards

Tekniset tiedot

BrandNEMIX RAM
SeriesASRock Server Motherboard Compatible Series Memory
ModelASRock DDR4 2666MHZ ECC RDIMM Registered Server Memory
Part NumberMR19200-324K8
Capacity256GB (8 x 32GB)
SpeedDDR4 2400 (PC4 19200)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemASRock
CAS LatencyCL17
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank2Rx4
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content256GB (8X32GB) DDR4 2400MHZ PC4-19200 2Rx4 1.2V CL17 288-PIN ECC RDIMM Registered Server Memory KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How can I confirm the 256GB DDR4 2400 kit is running at CL17 1.20V after installation?

Enter the system BIOS or UEFI and verify the memory frequency reads 2400 MT/s, CAS latency shows 17 and voltage is set to 1.20V; the registered ECC modules will also report 2Rx4 organisation.

What ships in the package and what must I source separately?

The box contains eight 32GB 288-pin DDR4 RDIMM modules for a total of 256GB; no heat spreaders, cables or tools are included, so have a compatible ASRock Rack ROMED8-2T motherboard ready.

Which capacity version should I choose for an EPYC server needing maximum registered ECC memory?

This kit provides 256GB via eight 32GB 2Rx4 RDIMMs at DDR4 2400 CL17; select it when your board supports the full 8-module population and you require registered ECC capacity.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.